Parts
| Description | Remark | ST | |||||
|---|---|---|---|---|---|---|---|
| headlight washer system |
|||||||
| 1 | (8K0955101) | lift cylinder D >> - 11.05.2009 |
left ; no longer available |
1 | |||
| 1 | 8K0955101B | lift cylinder also use: >>D11.10.2010 4G0 955 665 |
left |
1 1 |
|||
| (1) | (8K0955101A) | lift cylinder D >> - 11.10.2010 |
left ; no longer available |
1 | |||
| (1) | (8K0955102) | lift cylinder D >> - 11.05.2009 |
right ; no longer available |
1 | |||
| (1) | 8K0955102B | lift cylinder also use: >>D11.10.2010 4G0 955 665 |
right |
1 1 |
|||
| (1) | (8K0955102A) | lift cylinder D >> - 11.10.2010 |
right ; no longer available |
1 | |||
| 2 | 8K0955275 | cover cap |
left |
1 | PR-2K1,2K2 | ||
| 8K0955275 GRU | cover cap primed |
left 05.07 - 04.12 |
|||||
| (2) | 8K0955275A | cover cap |
left |
1 | PR-2K3,2K4, 2K7,2K8 |
||
| 8K0955275A GRU | cover cap primed |
left 04.08 - 04.12 |
|||||
| (2) | 8K0955276 | cover cap |
right |
1 | PR-2K1,2K2 | ||
| 8K0955276 GRU | cover cap primed |
right 05.07 - 04.12 |
|||||
| (2) | 8K0955276A | cover cap |
right |
1 | PR-2K3,2K4, 2K7,2K8 |
||
| 8K0955276A GRU | cover cap primed |
right 04.08 - 04.12 |
|||||
| 3 | 3B7955681 | pump for headlight-washer system |
1 | ||||
| - | N 90303801 | o-ring to use for: 3B7 955 681 |
9X1,5 |
1 | |||
| 4 | 431955465A | seal |
20,2X9,5 | 1 | |||
| 5 | 8E0955665 | elbow fitting D >> - 11.10.2010 |
90 degreeangle |
2 | |||
| (5) | 4G0955665 | elbow fitting D - 11.10.2010>> |
90 degreeangle |
2 | |||
| 5A | 8E0955665 | elbow fitting D >> - 24.05.2010 |
90 degreeangle |
1 | |||
| (5A) | 4G0955665 | elbow fitting D - 24.05.2010>> |
90 degreeangle |
1 | |||
| (5A) | 8E0955875 | connection piece D >> - 24.05.2010 |
straight |
1 | |||
| (5A) | 4G0955875 | connection piece D - 24.05.2010>> |
straight |
1 | |||
| 6 | 8E0955873 | connection piece D >> - 24.05.2010 |
straight |
1 | |||
| (6) | 4G0955873 | connection piece D - 24.05.2010>> |
straight |
1 | |||
| 7 | 8E0955975 | t-piece D >> - 11.10.2010 |
1 | ||||
| (7) | 4G0955975 | t-piece D - 11.10.2010>> |
1 | ||||
| 8 | N 10098001 | clamp |
18.5X7X0.60 | 3 | |||
| 9 | 3D0971838N | cable ties toothed quadrant hole/sheet metal thickness: 6,5/0,3-3MM |
4,5X200MM outer |
1 | |||
| - | 1J0955964F | hose in coils of 5morder unit 5 |
S10X3 | * | |||
| 14 | N 0209022 | cable ties |
3,6X246 | X | |||
| 15 | 1J0973722A | flat contact housing withcontact locking mechanism |
2 pin black |
1 | |||
| 16 | Переход к группе | see illustration: 955-010 |
|||||
| 18 | 8A0971848C | terminal for sheet metal thickness: 4MM |
16MM |
X | |||
| 19 | 447857991J | intermediate layer |
130X165 | 1 | |||
| 20 | 8K0955339 | spring clip for headlight washer system |
2 |