Parts
Description | Remark | ST | |||||
---|---|---|---|---|---|---|---|
wiring set for battery + for vehicles with hybrid drive |
|||||||
1 | 4G0972233 | wiring set for battery + (rear battery potential distributor) D >> - 09.07.2012 |
1 | ||||
(1) | 4G0972233A | wiring set for battery + (rear battery potential distributor) D - 09.07.2012>> |
1 | ||||
2 | N 90450201 | protective cap |
10X12 | 2 | |||
3 | 3D0971838A | cable tie with holder for weld pin: 5X200 5MM |
1 | ||||
4 | 1J0971930G | cable holder |
1 | ||||
5 | 4G0971216A | wiring set for battery + power and control electronics-for electric drive |
1 | ||||
6 | N 01508210 | hexagon collar nut |
M6 | 2 | |||
7 | N 10653201 | hex collared bolt |
M6X16 | 1 | |||
8 | 4G0971848D | protective cap |
1 | ||||
9 | 420941824A | main fuse socket |
1 | ||||
10 | N 10424905 | fuse |
110A | 1 | |||
(10) | N 10424907 | fuse |
175A | 1 | |||
11 | N 90488005 | hex. nut with washer |
M6 | 2 | |||
12 | 3W0971838 | cable ties hole/sheet metal thickness: 6,5 / 0,3-3,0 toothed quadrant high temperature resistant |
4,6X193 outer to 150 degreescelsius |
1 | |||
13 | 3D0971838N | cable ties toothed quadrant hole/sheet metal thickness: 6,5 / 0,3-3 |
4,5X200 outer |
1 | |||
14 | N 10502101 | retainer, swivel |
1 | ||||
15 | 4G0972381 | wiring set for battery + (rear potential distributor central electrics) |
1 | ||||
earth line for vehicles with hybrid drive |
|||||||
20 | 4G0971244A | earth line gearbox |
1 | ||||
21 | N 10538801 | bracket |
19X12X10 | 1 | |||
22 | WHT000869 | weld screw with capnut |
M8X20 | 1 | |||
23 | N 10155906 | hex collared bolt |
M8X20 | 1 | |||
24 | 4G0971237D | earth line power and control electronics-for electric drive |
1 | ||||
25 | WHT000868 | weld studs with cap nuts |
M6 | 1 | |||
26 | N 91079301 | hex collared bolt |
M8X16 | 1 | |||
27 | 4G0971235A | wiring set for battery - high-voltage battery |
1 | ||||
28 | WHT000869 | weld screw with capnut |
M8X20 | 1 | |||
29 | WHT000868 | weld studs with cap nuts |
M6 | 1 | |||
30 | 3D0971838A | cable tie with holder for weld pin: 5X200 5MM |
2 | ||||
31 | 1Y0971838 | cable tie with terminal socket with side cable guide for bridge strength: 1-3MM toothed quadrant (clamp base, rotating) |
4,6X200 outer |
1 | |||
- | 4B0971260A | anti-twist device |
1 |