| Supplier |
Number |
Part name |
Criteria |
Show Article Details |
|
| AJUSA |
15072300 |
Shaft Seal, crankshaft |
ArticleState: Normal
|
|
|
|
|
| 15105800 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 119 mm ;
Outer diameter [mm]: 140 mm ;
Height [mm]: 12 mm ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| ELRING |
090.510 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: ASW ;
Swirl Type: Left-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| 152.320 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: ASW ;
Swirl Type: Right-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| 904.820 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 185 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: ASW ;
Swirl Type: Left-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| FEBI BILSTEIN |
40532 |
Shaft Seal, crankshaft |
Engine Code: DC913; DC916 ;
Thickness [mm]: 13 mm ;
Inner diameter [mm]: 135 mm ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 185 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Material: ACM (Polyacrylate) ;
Fitting Position: Transmission End ;
Weight [kg]: 0.14 kg ;
ArticleState: Normal ;
General Information: für Schwungrad
;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
| GLASER |
P93261-01 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 185 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Left-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| P77749-01 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: without twist ;
ArticleState: Normal
|
|
|
|
|
| P77750-01 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| GOETZE |
50-319620-00 |
Shaft Seal, crankshaft |
TecDoc Engine Number: SCANIA DC 9.13 ;
TecDoc Engine Number: SCANIA DC 9.16 ;
Fitting Position: Transmission End ;
Height [mm]: 13 mm ;
Rotation Direction: Anti-clockwise rotation ;
Inner diameter [mm]: 145 mm ;
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Outer diameter [mm]: 175 mm ;
ArticleState: in Preparation
|
|
|
|
|
| PAYEN |
NA5471 |
Shaft Seal, crankshaft |
TecDoc Engine Number: SCANIA DC 9.13 ;
TecDoc Engine Number: SCANIA DC 9.16 ;
Fitting Position: Transmission End ;
Height [mm]: 13 mm ;
Rotation Direction: Anti-clockwise rotation ;
Inner diameter [mm]: 145 mm ;
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Outer diameter [mm]: 175 mm ;
ArticleState: in Preparation
|
|
|
|
|
| NA5300 |
Shaft Seal, crankshaft |
TecDoc Engine Number: SCANIA DC 9.16 ;
TecDoc Engine Number: SCANIA DC 9.13 ;
Fitting Position: Timing End ;
Height [mm]: 12 mm ;
Rotation Direction: Clockwise rotation ;
Radial Shaft Seal Design: ASW ;
Inner diameter [mm]: 120 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Outer diameter [mm]: 140 mm ;
ArticleState: Normal
|
|
|
|
|
| SAMPA |
041.147 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Height [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
ArticleState: Normal
|
|
|
|
|
| STELLOX |
81-01377-SX |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Height 1 [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Swirl Type: Right-hand Twist ;
Dust Cover: with dust lip ;
Outer diameter 1 [mm]: 140 mm ;
Inner diameter 1 [mm]: 120 mm ;
ArticleState: Normal
|
|
|
|
|
| VICTOR REINZ |
81-10445-00 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 185 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Left-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| 81-35996-00 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: without twist ;
ArticleState: Normal
|
|
|
|
|
| 81-35997-00 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| WILMINK GROUP |
WG1151030 |
Shaft Seal, crankshaft |
Width [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: ASW ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 152.320
|
|
|
|
|
| WG1250275 |
Shaft Seal, crankshaft |
Width [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: A SL ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Reinz 81-35997-00
|
|
|
|
|
| WG1195673 |
Shaft Seal, crankshaft |
Width [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 185 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: ASW ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 904.820
|
|
|
|
|
| WG1379822 |
Shaft Seal, crankshaft |
Width [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 185 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: A SL ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Reinz 81-10445-00
|
|
|
|
|
| WG1151028 |
Shaft Seal, crankshaft |
Width [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: ASW ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 090.510
|
|
|
|
|
| WG1250274 |
Shaft Seal, crankshaft |
Width [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Swirl Type: without twist ;
Radial Shaft Seal Design: A SL ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Reinz 81-35996-00
|
|
|
|
|
