| Supplier |
Number |
Part name |
Criteria |
Show Article Details |
|
| ELRING |
359.180 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Inner diameter [mm]: 100 mm ;
Radial Shaft Seal Design: SP ;
Swirl Type: Left-hand Twist ;
Material: PTFE (polytetrafluoroethylene) ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| 359.260 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Inner diameter [mm]: 45 mm ;
Outer diameter [mm]: 75 mm ;
Width [mm]: 11 mm ;
Radial Shaft Seal Design: ASW ;
Swirl Type: Right-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| WILMINK GROUP |
WG1192192 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Width [mm]: 11 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 45 mm ;
Outer diameter [mm]: 75 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: ASW ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Elring 359.260
|
|
|
|
|
| WG1194034 |
Shaft Seal, crankshaft |
Width [mm]: 13.5 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 45 mm ;
Outer diameter [mm]: 75 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: SP ;
Dust Cover: with dust lip ;
Width 1 [mm]: 20 mm ;
ArticleState: Normal ;
General Information: Elring 656.160
|
|
|
|
|
| WG1192189 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 100 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: SP ;
ArticleState: Normal ;
General Information: Elring 359.180
|
|
|
|
|
