| Supplier |
Number |
Part name |
Criteria |
Show Article Details |
|
| ELRING |
152.320 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: ASW ;
Swirl Type: Right-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| 090.510 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: ASW ;
Swirl Type: Left-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| FEBI BILSTEIN |
09895 |
Shaft Seal, crankshaft |
Construction year to: 12.1995 ;
Lambda Sensor: Regulating Probe ;
Thickness [mm]: 15 mm ;
Inner diameter [mm]: 130 mm ;
Outer diameter [mm]: 160 mm ;
Material: MVQ (Silicone Elastomer) ;
Fitting Position: Transmission End ;
Weight [kg]: 0.105 kg ;
ArticleState: Normal ;
General Information: für Schwungrad
;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
| GLASER |
P77750-01 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| P77749-01 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: without twist ;
ArticleState: Normal
|
|
|
|
|
| GOETZE |
50-319620-00 |
Shaft Seal, crankshaft |
Construction year from: 09.1997 ;
TecDoc Engine Number: SCANIA DSC 12.05 ;
Construction year from: 09.1998 ;
TecDoc Engine Number: SCANIA DC 12.01 ;
Fitting Position: Transmission End ;
Height [mm]: 13 mm ;
Rotation Direction: Anti-clockwise rotation ;
Inner diameter [mm]: 145 mm ;
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Outer diameter [mm]: 175 mm ;
ArticleState: in Preparation
|
|
|
|
|
| PAYEN |
NA5300 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Height [mm]: 12 mm ;
Rotation Direction: Clockwise rotation ;
Radial Shaft Seal Design: ASW ;
Inner diameter [mm]: 120 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Outer diameter [mm]: 140 mm ;
ArticleState: Normal
|
|
|
|
|
| SAMPA |
041.146 |
Shaft Seal, crankshaft |
Engine Code: ABY ;
Catalytic Converter Type: for vehicles without catalytic convertor ;
Lambda Sensor: Regulating Probe ;
Fitting Position: Transmission End ;
Inner diameter [mm]: 130 mm ;
Outer diameter [mm]: 160 mm ;
Height [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene) ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| 041.143 |
Shaft Seal, crankshaft |
Weight [kg]: 0.38 kg ;
Fitting Position: Timing End ;
Inner diameter [mm]: 130 mm ;
Outer diameter [mm]: 160 mm ;
Height [mm]: 15 mm ;
Material: FPM (fluoride rubber) ;
ArticleState: Normal
|
|
|
|
|
| 041.147 |
Shaft Seal, crankshaft |
Engine Code: ABY ;
Lambda Sensor: Regulating Probe ;
Exhaust System: in front of the catalyst ;
Fitting Position: Transmission End ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Height [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
ArticleState: Normal
|
|
|
|
|
| 041.145 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Inner diameter [mm]: 80 mm ;
Outer diameter [mm]: 100 mm ;
Height [mm]: 12 mm ;
Material: FPM (fluoride rubber) ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| 041.149 |
Shaft Seal, crankshaft |
Engine Code: ABY ;
Fitting Position: Timing End ;
Inner diameter [mm]: 80 mm ;
Outer diameter [mm]: 100 mm ;
Height [mm]: 12.75 mm ;
Material: PTFE (polytetrafluoroethylene) ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| STELLOX |
81-01377-SX |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Height 1 [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Swirl Type: Right-hand Twist ;
Dust Cover: with dust lip ;
Outer diameter 1 [mm]: 140 mm ;
Inner diameter 1 [mm]: 120 mm ;
ArticleState: Normal
|
|
|
|
|
| VICTOR REINZ |
81-35996-00 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: without twist ;
ArticleState: Normal
|
|
|
|
|
| 81-35997-00 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| WILMINK GROUP |
WG1151028 |
Shaft Seal, crankshaft |
Width [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: ASW ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 090.510
|
|
|
|
|
| WG1250274 |
Shaft Seal, crankshaft |
Width [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Swirl Type: without twist ;
Radial Shaft Seal Design: A SL ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Reinz 81-35996-00
|
|
|
|
|
| WG1151030 |
Shaft Seal, crankshaft |
Width [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: ASW ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 152.320
|
|
|
|
|
| WG1250275 |
Shaft Seal, crankshaft |
Width [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: A SL ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Reinz 81-35997-00
|
|
|
|
|
| WG1183270 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Height [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Radial Shaft Seal Design: ASW ;
Rotation Direction: Clockwise rotation ;
ArticleState: Normal ;
General Information: Payen NA5300
|
|
|
|
|
