Supplier |
Number |
Part name |
Criteria |
Show Article Details |
|
FEBI BILSTEIN |
31583 |
Brake Adjuster |
Paired article numbers: 31584 ; Operating Mode: Automatic ; Fitting Position: Right ; Weight [kg]: 3.31 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
31586 |
Brake Adjuster |
Paired article numbers: 31585 ; Operating Mode: Automatic ; Fitting Position: Left ; Weight [kg]: 3.3 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
31606 |
Brake Adjuster |
Paired article numbers: 31607 ; Operating Mode: Automatic ; Fitting Position: Left ; Weight [kg]: 3.3 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
31613 |
Brake Adjuster |
Paired article numbers: 31612 ; Operating Mode: Automatic ; Fitting Position: Left ; Weight [kg]: 3.1 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
31584 |
Brake Adjuster |
Paired article numbers: 31583 ; Operating Mode: Automatic ; Fitting Position: Left ; Weight [kg]: 3.4 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
31604 |
Brake Adjuster |
Paired article numbers: 31605 ; Operating Mode: Automatic ; Fitting Position: Left ; Weight [kg]: 3.1 kg ; ArticleState: Normal ; General Information: automatisch, Einzelsatz
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
31607 |
Brake Adjuster |
Paired article numbers: 31606 ; Operating Mode: Automatic ; Fitting Position: Right ; Weight [kg]: 3.2 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
31585 |
Brake Adjuster |
Paired article numbers: 31586 ; Operating Mode: Automatic ; Fitting Position: Right ; Weight [kg]: 3.2 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
31605 |
Brake Adjuster |
Paired article numbers: 31604 ; Operating Mode: Automatic ; Fitting Position: Right ; Weight [kg]: 3 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
31612 |
Brake Adjuster |
Paired article numbers: 31613 ; Operating Mode: Automatic ; Fitting Position: Right ; Weight [kg]: 3 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
HALDEX |
80000C |
Brake Adjuster |
Fitting Position: Rear Axle ; Fitting Position: Left ; Axle Version: 748.236 ; Equipment Variant: (42) 504527/29 ; Axle Version: 748.238 ; Equipment Variant: (42) 504527/03 ; Equipment Variant: (42) 504527/23 ; Required quantity: 1 ; Operating Mode: Automatic ; Control Unit ID: 527 ; Number of Teeth: 26 ; Number of Bores: 1 ; Off-set left [mm]: -56 mm ; Tooth System: N42x1.5x13H DIN 5480 ; Axle Version: 80001C ; Weight [kg]: 3.3 kg ; Bore Distance 1 [mm]: 145 mm ; Bore Ø 1 [mm]: 14 mm ; ArticleState: Normal
|
|
|
|
|
80001C |
Brake Adjuster |
Fitting Position: Rear Axle ; Fitting Position: Right ; Axle Version: 748.236 ; Equipment Variant: (42) 504527/30 ; Axle Version: 748.238 ; Equipment Variant: (42) 504527/04 ; Equipment Variant: (42) 504527/24 ; Required quantity: 1 ; Operating Mode: Automatic ; Control Unit ID: 527 ; Number of Teeth: 26 ; Number of Bores: 1 ; Off-set left [mm]: 56 mm ; Tooth System: N42x1.5x13H DIN 5480 ; Axle Version: 80000C ; Weight [kg]: 3.3 kg ; Bore Distance 1 [mm]: 145 mm ; Bore Ø 1 [mm]: 14 mm ; ArticleState: Normal
|
|
|
|
|
90571 |
Sensor, brake pad wear |
Fitting Position: Front Axle ; Fitting Position: Right ; Axle Version: 730.100 ; Axle number to: E 558 268 ; Equipment Variant: (42) 504527/02 ; Axle number to: V 937 618 ; Axle Version: 730.108 ; Axle Version: 730.109 ; Equipment Variant: (42) 504527/12 ; Axle number from: V 937 619 ; Equipment Variant: (42) 504527/74 ; Fitting Position: Rear Axle ; Fitting Position: Left ; Axle Version: 748.236 ; Axle Version: 748.238 ; Equipment Variant: (42) 504527/03 ; Equipment Variant: (42) 504527/23 ; Equipment Variant: (42) 504527/24 ; Equipment Variant: (42) 504527/75 ; Required quantity: 1 ; Supplementary Article/Supplementary Info: without cable ; Version: Daimler ; Weight [kg]: 0.2 kg ; ArticleState: Normal
|
|
|
|
|
80009C |
Brake Adjuster |
Fitting Position: Front Axle ; Fitting Position: Right ; Axle Version: 730.100 ; Equipment Variant: (42) 504527/02 ; Axle Version: 730.108 ; Axle Version: 730.109 ; Equipment Variant: (42) 504527/12 ; Required quantity: 1 ; Operating Mode: Automatic ; Control Unit ID: 528 ; Number of Teeth: 26 ; Number of Bores: 1 ; Off-set left [mm]: -37 mm ; Tooth System: N42x1.5x13H DIN 5480 ; Axle Version: 80008C ; Weight [kg]: 3.3 kg ; Bore Distance 1 [mm]: 145 mm ; Bore Ø 1 [mm]: 14 mm ; ArticleState: Normal
|
|
|
|
|
90572 |
Sensor, brake pad wear |
Fitting Position: Front Axle ; Fitting Position: Left ; Axle Version: 730.100 ; Axle number to: E 558 268 ; Equipment Variant: (42) 504527/01 ; Axle number to: V 937 618 ; Axle Version: 730.108 ; Axle Version: 730.109 ; Equipment Variant: (42) 504527/11 ; Axle number from: V 937 619 ; Equipment Variant: (42) 504527/73 ; Fitting Position: Rear Axle ; Axle Version: 748.236 ; Axle Version: 748.238 ; Equipment Variant: (42) 504527/04 ; Equipment Variant: (42) 504527/24 ; Fitting Position: Right ; Equipment Variant: (42) 504527/76 ; Required quantity: 1 ; Supplementary Article/Supplementary Info: without cable ; Version: Daimler ; Weight [kg]: 0.2 kg ; ArticleState: Normal
|
|
|
|
|
MEYLE |
034 533 0038 |
Brake Adjuster |
Replace in pairs only: ; Operating Mode: Automatic ; Off-set left [mm]: 56 mm ; Tooth System: N42x1,5x9H DIN 5480 ; Number of Teeth: 26 ; Bore Ø [mm]: 14 mm ; Paired article numbers: 034 533 0037 ; ArticleState: No longer supplied by manufacturer
|
|
|
|
|
034 533 0002 |
Brake Adjuster |
Fitting Position: Right ; Replace in pairs only: ; Operating Mode: Automatic ; Off-set left [mm]: 37 mm ; Tooth System: N42x1.5x9H DIN 5480 ; Control Unit ID: 528 ; Number of Teeth: 26 ; Bore Ø [mm]: 14 mm ; ArticleState: Normal
|
|
|
|
|
034 533 0039 |
Brake Adjuster |
Fitting Position: Right ; Replace in pairs only: ; Operating Mode: Automatic ; Off-set left [mm]: 37 mm ; Tooth System: N42x1,5x9H DIN 5480 ; Control Unit ID: 528 ; Bore Ø [mm]: 14 mm ; Paired article numbers: 034 533 0040 ; Number of Teeth: 26 ; ArticleState: Article to be discontinued
|
|
|
|
|
034 533 0037 |
Brake Adjuster |
Replace in pairs only: ; Operating Mode: Automatic ; Off-set left [mm]: 56 mm ; Tooth System: N42x1,5x9H DIN 5480 ; Number of Teeth: 26 ; Bore Ø [mm]: 14 mm ; Paired article numbers: 034 533 0038 ; ArticleState: No longer supplied by manufacturer
|
|
|
|
|
034 533 0040 |
Brake Adjuster |
Axle Design: 730.109 ; Equipment Variant: 504527/73 ; Fitting Position: Left ; Replace in pairs only: ; Operating Mode: Automatic ; Off-set left [mm]: 37 mm ; Tooth System: N42x1,5x9H DIN 5480 ; Control Unit ID: 528 ; Number of Teeth: 26 ; Bore Ø [mm]: 14 mm ; Paired article numbers: 034 533 0039 ; ArticleState: Normal
|
|
|
|
|
PE Automotive |
016.160-00A |
Spacer, adjuster |
Inner diameter [mm]: 42.5 mm ; Outer diameter [mm]: 50 mm ; Thickness [mm]: 2 mm ; Weight [kg]: 0.008 kg ; ArticleState: Normal
|
|
|
|
|
016.158-00A |
Stop Plate, adjuster |
Inner diameter [mm]: 39.2 mm ; Inner diameter 1 [mm]: 42.2 mm ; Outer diameter [mm]: 60.2 mm ; Thickness [mm]: 3 mm ; Weight [kg]: 0.036 kg ; ArticleState: Normal
|
|
|
|
|
086.417-00A |
Sensor, brake pad wear |
Overall Length [mm]: 2083 mm ; Cable Length [mm]: 2000 mm ; Supplementary Article/Supplementary Info: with bush ; Weight [kg]: 0.11 kg ; ArticleState: Normal
|
|
|
|
|
016.159-00A |
Spacer, adjuster |
Inner diameter [mm]: 42.5 mm ; Outer diameter [mm]: 50 mm ; Thickness [mm]: 1.5 mm ; Weight [kg]: 0.006 kg ; ArticleState: Normal
|
|
|
|
|
016.161-00A |
Spacer, adjuster |
Inner diameter [mm]: 42.5 mm ; Outer diameter [mm]: 50 mm ; Thickness [mm]: 2.5 mm ; Weight [kg]: 0.01 kg ; ArticleState: Normal
|
|
|
|
|
016.178-00A |
Conical Pulley, adjuster |
Inner diameter [mm]: 45.5 mm ; Outer diameter [mm]: 58 mm ; Outer diameter 1 [mm]: 62 mm ; Height [mm]: 9 mm ; Material: Plastic ; Weight [kg]: 0.09 kg ; ArticleState: Normal
|
|
|
|
|
016.159-10A |
Spacer, adjuster |
Inner diameter [mm]: 42.5 mm ; Outer diameter [mm]: 50 mm ; Thickness [mm]: 0.5 mm ; Weight [kg]: 0.002 kg ; ArticleState: Normal
|
|
|
|
|
016.163-10A |
Spacer, adjuster |
Inner diameter [mm]: 35 mm ; Outer diameter [mm]: 45 mm ; Thickness [mm]: 2 mm ; Weight [kg]: 0.01 kg ; ArticleState: Normal
|
|
|
|
|
SBP |
08-ME005 |
Brake Adjuster |
Operating Mode: Automatic ; ArticleState: Normal
|
|
|
|
|
08-ME018 |
Brake Adjuster |
Fitting Position: Right ; Operating Mode: Automatic ; ArticleState: Normal
|
|
|
|
|
08-ME021 |
Brake Adjuster |
Fitting Position: Right Rear ; ArticleState: Normal
|
|
|
|
|
08-ME006 |
Brake Adjuster |
Operating Mode: Automatic ; ArticleState: Normal
|
|
|
|
|
08-ME019 |
Brake Adjuster |
Fitting Position: Left ; Operating Mode: Automatic ; ArticleState: Normal
|
|
|
|
|
08-ME004 |
Brake Adjuster |
Operating Mode: Automatic ; ArticleState: Normal
|
|
|
|
|
08-ME009 |
Brake Adjuster |
Control Unit ID: 74527 ; Number of Teeth: 26 ; Bore Ø [mm]: 14 mm ; Axle Version: S-ABA ; Operating Mode: Automatic ; Off-set left [mm]: 56 mm ; Replace in pairs only: ; Tooth System: N42x1.5x9H DIN 5480 ; ArticleState: Normal
|
|
|
|
|
08-ME020 |
Brake Adjuster |
Fitting Position: Left Rear ; ArticleState: Normal
|
|
|
|
|
ST-TEMPLIN |
03.030.8790.166 |
Brake Adjuster |
Fitting Position: Left ; Tooth System: N42x1.5x12H DIN 5480 ; Operating Mode: Automatic ; ArticleState: Normal
|
|
|
|
|
03.030.8790.000 |
Brake Adjuster |
Fitting Position: Right ; Tooth System: N42x1.5x13H DIN 5480 ; Operating Mode: Automatic ; ArticleState: Normal
|
|
|
|
|
03.030.8790.001 |
Brake Adjuster |
Fitting Position: Left ; Tooth System: N42x1.5x13H DIN 5480 ; Operating Mode: Automatic ; ArticleState: Normal
|
|
|
|
|
03.030.8790.009 |
Brake Adjuster |
Fitting Position: Left ; Tooth System: N42x1.5x12H DIN 5480 ; Operating Mode: Automatic ; ArticleState: Normal
|
|
|
|
|
03.030.8790.014 |
Brake Adjuster |
Fitting Position: Right ; Tooth System: N42x1.5x13H DIN 5480 ; Operating Mode: Automatic ; ArticleState: Normal
|
|
|
|
|
03.030.8790.165 |
Brake Adjuster |
Fitting Position: Right ; Tooth System: N42x1.5x12H DIN 5480 ; Operating Mode: Automatic ; ArticleState: Normal
|
|
|
|
|
03.030.8790.008 |
Brake Adjuster |
Fitting Position: Right ; Tooth System: N42x1.5x12H DIN 5480 ; Operating Mode: Manual ; ArticleState: Normal
|
|
|
|
|
03.030.8790.030 |
Brake Adjuster |
Fitting Position: Left ; Tooth System: N42x1.5x13H DIN 5480 ; Operating Mode: Automatic ; ArticleState: Normal
|
|
|
|
|
STELLOX |
85-51545-SX |
Sensor, brake pad wear |
Weight [kg]: 0.07 kg ; Brake Type: Drum Brake ; Warning Contact Length [mm]: 190 mm ; ArticleState: Normal
|
|
|
|
|
85-04173-SX |
Adjusting Shaft, slack adjuster |
Number of Holes: 1 ; Bore Ø [mm]: 14 mm ; Bore Distance [mm]: 145 mm ; Fitting Position: Rear Axle Right ; Operating Mode: Automatic ; Weight [kg]: 3.044 kg ; ArticleState: Normal
|
|
|
|
|
85-04067-SX |
Adjusting Shaft, slack adjuster |
Fitting Position: Right ; Operating Mode: Automatic ; Tooth System: DIN5480 N42x1.5 ; Number of Teeth: 26 ; Bore Ø [mm]: 14.2 mm ; ArticleState: Normal
|
|
|
|
|
85-04172-SX |
Adjusting Shaft, slack adjuster |
Number of Holes: 1 ; Bore Ø [mm]: 14 mm ; Bore Distance [mm]: 145 mm ; Fitting Position: Left ; Operating Mode: Automatic ; Weight [kg]: 3.145 kg ; ArticleState: Normal
|
|
|
|
|
WABCO |
441 032 823 0 |
Sensor, brake pad wear |
Length [mm]: 2000 mm ; Resistance [Ohm]: 1150 Ohm ; Colour: Black ; ArticleState: Normal
|
|
|
|
|