| Supplier |
Number |
Part name |
Criteria |
Show Article Details |
|
| CORTECO |
01026325B |
Shaft Seal, differential |
Fitting Position: Rear Axle ;
Fitting Position: Outlet ;
Fitting Position: inner ;
Inner diameter 1 [mm]: 60 mm ;
Outer diameter 1 [mm]: 73 mm ;
Height 1 [mm]: 11 mm ;
Material: FPM (fluoride rubber) ;
Dust Cover: with dust lip ;
Fitting Position: Rear Axle ;
ArticleState: Normal
|
|
|
|
|
| 01033403B |
Shaft Seal, differential |
Fitting Position: Rear Axle ;
Fitting Position: Inlet ;
Inner diameter 1 [mm]: 40 mm ;
Outer diameter 1 [mm]: 70 mm ;
Height 1 [mm]: 11 mm ;
Height 2 [mm]: 18 mm ;
Dust Cover: with dust lip ;
Swirl Type: Right-hand Twist ;
Material: PU (Polyurethane) ;
ArticleState: Normal
|
|
|
|
|
| ELRING |
456.980 |
Shaft Seal, differential |
Fitting Position: Rear propshaft at differential ;
Inner diameter [mm]: 40 mm ;
Outer diameter [mm]: 70 mm ;
Width [mm]: 18 mm ;
Radial Shaft Seal Design: A/BS2 ;
Swirl Type: Right-hand Twist ;
Material: FPM (fluoride rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal
|
|
|
|
|
| FEBI BILSTEIN |
36330 |
Nut, bevel gear |
Thickness [mm]: 35 mm ;
Inner thread [mm]: M26 x 1,5 mm ;
Surface: Geomitrised ;
Diameter [mm]: 40 mm ;
Weight [kg]: 0.049 kg ;
ArticleState: Normal ;
General Information: für Gelenkflansch
;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
| SWAG |
10 93 6330 |
Nut, bevel gear |
Thickness [mm]: 35 mm ;
Inner thread [mm]: M26 x 1,5 mm ;
Surface: Geomitrised ;
Diameter [mm]: 40 mm ;
Weight [kg]: 0.049 kg ;
ArticleState: Normal ;
General Information: für Gelenkflansch
;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
| VAICO |
V10-9775 |
Shaft Seal, differential |
Outer diameter [mm]: 73 mm ;
Fitting Position: Rear Axle ;
Inner diameter [mm]: 60 mm ;
ArticleState: Normal
|
|
|
|
|
| WILMINK GROUP |
WG1192880 |
Shaft Seal, differential |
Fitting Position: Rear propshaft at differential ;
Width [mm]: 18 mm ;
Material: FPM (fluoride rubber) ;
Inner diameter [mm]: 40 mm ;
Outer diameter [mm]: 70 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: A/BS2 ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 456.980
|
|
|
|
|
