Supplier |
Number |
Part name |
Criteria |
Show Article Details |
|
3RG |
80437 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ; Inner diameter [mm]: 42 mm ; Outer diameter [mm]: 62 mm ; Width [mm]: 10 mm ; ArticleState: Normal
|
|
|
|
|
AJUSA |
15061800 |
Shaft Seal, camshaft |
Inner diameter [mm]: 27 mm ; Outer diameter [mm]: 47 mm ; Width [mm]: 7 mm ; ArticleState: Normal
|
|
|
|
|
15088500 |
Shaft Seal, crankshaft |
ArticleState: Normal
|
|
|
|
|
15088600 |
Shaft Seal, crankshaft |
ArticleState: Normal
|
|
|
|
|
BGA |
OS0351 |
Shaft Seal, camshaft |
Width 1 [mm]: 7 mm ; Outer diameter 1 [mm]: 47 mm ; Inner diameter 1 [mm]: 27 mm ; ArticleState: Normal
|
|
|
|
|
OS8380 |
Shaft Seal, crankshaft |
Shape: Round ; Outer diameter 1 [mm]: 62 mm ; Inner diameter 1 [mm]: 42 mm ; ArticleState: Normal
|
|
|
|
|
OS8387 |
Shaft Seal, crankshaft |
Shape: Round ; Outer diameter 1 [mm]: 110 mm ; Inner diameter 1 [mm]: 90 mm ; ArticleState: Normal
|
|
|
|
|
CORTECO |
20015455B |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ; Inner diameter 1 [mm]: 90 mm ; Outer diameter 1 [mm]: 110 mm ; Height 1 [mm]: 7 mm ; Material: FPM (fluoride rubber)/ACM (polyacrylate rubber) ; Swirl Type: Left-hand Twist ; Dust Cover: with dust lip ; ArticleState: Normal
|
|
|
|
|
20026123B |
Shaft Seal, camshaft |
Inner diameter 1 [mm]: 27 mm ; Outer diameter 1 [mm]: 47 mm ; Height 1 [mm]: 7 mm ; Material: FPM (fluoride rubber) ; Swirl Type: Right-hand Twist ; Dust Cover: with dust lip ; ArticleState: Normal
|
|
|
|
|
20015456B |
Shaft Seal, crankshaft |
Fitting Position: Timing End ; Inner diameter 1 [mm]: 42 mm ; Outer diameter 1 [mm]: 62 mm ; Height 1 [mm]: 7 mm ; Material: FPM (fluoride rubber)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; Swirl Type: Right-hand Twist ; ArticleState: Normal
|
|
|
|
|
ELRING |
394.011 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 90 mm ; Outer diameter [mm]: 110 mm ; Width [mm]: 7 mm ; Radial Shaft Seal Design: ASW ; Swirl Type: Left-hand Twist ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; Supplementary Article/Info 2: with mounting sleeve ; Thickness [mm]: 7 mm ; ArticleState: Normal ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
153.740 |
Shaft Seal, camshaft |
Inner diameter [mm]: 27 mm ; Outer diameter [mm]: 47 mm ; Width [mm]: 7 mm ; Radial Shaft Seal Design: ASW ; Swirl Type: Right-hand Twist ; Material: FPM (fluoride rubber) ; Dust Cover: with dust lip ; ArticleState: Normal
|
|
|
|
|
393.990 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 42 mm ; Outer diameter [mm]: 62 mm ; Width [mm]: 7 mm ; Radial Shaft Seal Design: ASW ; Swirl Type: Right-hand Twist ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; Supplementary Article/Info 2: with mounting sleeve ; Thickness [mm]: 7 mm ; ArticleState: Normal ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
ELWIS ROYAL |
8044232 |
Shaft Seal, camshaft |
Required quantity: 1 ; Width [mm]: 7 mm ; Material: ACM (Polyacrylate) ; Inner diameter [mm]: 27 mm ; Outer diameter [mm]: 47 mm ; ArticleState: Normal
|
|
|
|
|
FAI AutoParts |
OS8690 |
Shaft Seal, camshaft |
Inner diameter [mm]: 27 mm ; Outer diameter [mm]: 47 mm ; Width [mm]: 7 mm ; ArticleState: Normal
|
|
|
|
|
FEBI BILSTEIN |
19571 |
Shaft Seal, camshaft |
Thickness [mm]: 7 mm ; Inner diameter [mm]: 27 mm ; Outer diameter [mm]: 47 mm ; Material: FPM (fluoride rubber)/ACM (polyacrylate rubber) ; Fitting Position: Timing End ; Weight [kg]: 0,015 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
GLASER |
P77142-01 |
Shaft Seal, camshaft |
Material: FPM (fluoride rubber) ; Inner diameter [mm]: 27 mm ; Outer diameter [mm]: 47 mm ; Width [mm]: 7 mm ; Radial Shaft Seal Design: A SL ; Swirl Type: Right-hand Twist ; ArticleState: Normal
|
|
|
|
|
P77464-01 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ; Supplementary Article/Info 2: with mounting sleeve ; Inner diameter [mm]: 42 mm ; Outer diameter [mm]: 62 mm ; Width [mm]: 7 mm ; Radial Shaft Seal Design: A SL ; Swirl Type: Right-hand Twist ; ArticleState: Normal
|
|
|
|
|
P77465-01 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ; Inner diameter [mm]: 90 mm ; Outer diameter [mm]: 110 mm ; Width [mm]: 7 mm ; Radial Shaft Seal Design: A SL ; Swirl Type: Left-hand Twist ; ArticleState: Normal
|
|
|
|
|
GOETZE |
50-319500-00 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ; Height [mm]: 7 mm ; Material: PTFE (polytetrafluoroethylene) ; Inner diameter [mm]: 42 mm ; Outer diameter [mm]: 62 mm ; ArticleState: Normal
|
|
|
|
|
50-319474-00 |
Shaft Seal, camshaft |
Height [mm]: 7 mm ; Material: FPM (fluoride rubber) ; Inner diameter [mm]: 27 mm ; Outer diameter [mm]: 47 mm ; Radial Shaft Seal Design: 829S RD ; Rotation Direction: Clockwise rotation ; ArticleState: Normal
|
|
|
|
|
50-319501-00 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ; Height [mm]: 7 mm ; Material: PTFE (polytetrafluoroethylene) ; Inner diameter [mm]: 90 mm ; Outer diameter [mm]: 110 mm ; ArticleState: Normal
|
|
|
|
|
PAYEN |
NA5192 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ; Height [mm]: 7 mm ; Rotation Direction: Anti-clockwise rotation ; Radial Shaft Seal Design: 829S LD W ; Inner diameter [mm]: 90 mm ; Material: PTFE (polytetrafluoroethylene) ; Outer diameter [mm]: 110 mm ; ArticleState: Normal
|
|
|
|
|
NA5035 |
Shaft Seal, camshaft |
Height [mm]: 7 mm ; Material: FPM (fluoride rubber) ; Inner diameter [mm]: 27 mm ; Outer diameter [mm]: 47 mm ; Radial Shaft Seal Design: 827S RD W ; Rotation Direction: Clockwise rotation ; ArticleState: Normal
|
|
|
|
|
NA5191 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ; Height [mm]: 7 mm ; Rotation Direction: Clockwise rotation ; Radial Shaft Seal Design: 829S RD W ; Inner diameter [mm]: 42 mm ; Material: PTFE (polytetrafluoroethylene) ; Outer diameter [mm]: 62 mm ; ArticleState: Normal
|
|
|
|
|
STELLOX |
34-00023-SX |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ; Height 1 [mm]: 7 mm ; Material: FPM (fluoride rubber)/ACM (polyacrylate rubber) ; Swirl Type: Left-hand Twist ; Dust Cover: with dust lip ; Outer diameter 1 [mm]: 110 mm ; Inner diameter 1 [mm]: 90 mm ; ArticleState: Normal
|
|
|
|
|
34-00069-SX |
Shaft Seal, camshaft |
Height 1 [mm]: 7 mm ; Material: FPM (fluoride rubber) ; Swirl Type: Right-hand Twist ; Dust Cover: with dust lip ; Outer diameter 1 [mm]: 47 mm ; Inner diameter 1 [mm]: 27 mm ; ArticleState: Normal
|
|
|
|
|
34-00046-SX |
Shaft Seal, crankshaft |
Fitting Position: Timing End ; Height 1 [mm]: 7 mm ; Material: NBR (nitrile butadiene rubber) ; Dust Cover: with dust lip ; Outer diameter 1 [mm]: 62 mm ; Inner diameter 1 [mm]: 42 mm ; ArticleState: Normal
|
|
|
|
|
SWAG |
62 91 9571 |
Shaft Seal, camshaft |
Thickness [mm]: 7 mm ; Inner diameter [mm]: 27 mm ; Outer diameter [mm]: 47 mm ; Material: FPM (fluoride rubber)/ACM (polyacrylate rubber) ; Fitting Position: Timing End ; Weight [kg]: 0,015 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
TOPRAN |
722 520 |
Shaft Seal, crankshaft |
TecDoc Engine Number: PEUGEOT RHR (DW10BTED4) ; Fitting Position: Timing End ; Height [mm]: 7 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Inner diameter [mm]: 42 mm ; Outer diameter [mm]: 62 mm ; ArticleState: Normal
|
|
|
|
|
720 119 |
Shaft Seal, camshaft |
Material: FPM (fluoride rubber) ; Inner diameter [mm]: 27 mm ; Outer diameter [mm]: 47 mm ; Height [mm]: 7 mm ; ArticleState: Normal
|
|
|
|
|
722 519 |
Shaft Seal, crankshaft |
TecDoc Engine Number: PEUGEOT RHR (DW10BTED4) ; Outer diameter [mm]: 110 mm ; Inner diameter [mm]: 90 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Fitting Position: Transmission End ; Height [mm]: 7 mm ; ArticleState: Normal
|
|
|
|
|
VICTOR REINZ |
81-36556-00 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ; Inner diameter [mm]: 90 mm ; Outer diameter [mm]: 110 mm ; Width [mm]: 7 mm ; Radial Shaft Seal Design: A SL ; Swirl Type: Left-hand Twist ; ArticleState: Normal
|
|
|
|
|
81-36557-00 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ; Supplementary Article/Info 2: with mounting sleeve ; Inner diameter [mm]: 42 mm ; Outer diameter [mm]: 62 mm ; Width [mm]: 7 mm ; Radial Shaft Seal Design: A SL ; Swirl Type: Right-hand Twist ; ArticleState: Normal
|
|
|
|
|
81-34144-00 |
Shaft Seal, camshaft |
Material: FPM (fluoride rubber) ; Inner diameter [mm]: 27 mm ; Outer diameter [mm]: 47 mm ; Width [mm]: 7 mm ; Radial Shaft Seal Design: A SL ; Swirl Type: Right-hand Twist ; ArticleState: Normal
|
|
|
|
|
WILMINK GROUP |
WG1091098 |
Shaft Seal, camshaft |
Height [mm]: 7 mm ; Material: FPM (fluoride rubber) ; Inner diameter [mm]: 27 mm ; Outer diameter [mm]: 47 mm ; Radial Shaft Seal Design: 827S RD W ; Rotation Direction: Clockwise rotation ; ArticleState: Normal ; General Information: Payen NA5035
|
|
|
|
|
WG1190902 |
Shaft Seal, camshaft |
Width [mm]: 7 mm ; Material: FPM (fluoride rubber) ; Inner diameter [mm]: 27 mm ; Outer diameter [mm]: 47 mm ; Swirl Type: Right-hand Twist ; Radial Shaft Seal Design: ASW ; Dust Cover: with dust lip ; ArticleState: Normal ; General Information: Elring 153.740
|
|
|
|
|
WG1004866 |
Shaft Seal, crankshaft |
Width [mm]: 7 mm ; Material: PTFE (polytetrafluoroethylene) ; Inner diameter [mm]: 42 mm ; Outer diameter [mm]: 62 mm ; Swirl Type: Right-hand Twist ; Radial Shaft Seal Design: A SL ; Supplementary Article/Info 2: with mounting sleeve ; ArticleState: Normal ; General Information: Glaser P77464-01
|
|
|
|
|
WG1091109 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ; Height [mm]: 7 mm ; Material: PTFE (polytetrafluoroethylene) ; Inner diameter [mm]: 42 mm ; Outer diameter [mm]: 62 mm ; Radial Shaft Seal Design: 829S RD W ; Rotation Direction: Clockwise rotation ; ArticleState: Normal ; General Information: Payen NA5191
|
|
|
|
|
WG1250291 |
Shaft Seal, crankshaft |
Width [mm]: 7 mm ; Material: PTFE (polytetrafluoroethylene) ; Inner diameter [mm]: 90 mm ; Outer diameter [mm]: 110 mm ; Swirl Type: Left-hand Twist ; Radial Shaft Seal Design: A SL ; ArticleState: Normal ; General Information: Reinz 81-36556-00
|
|
|
|
|
WG1163411 |
Shaft Seal, camshaft |
Width [mm]: 7 mm ; Inner diameter [mm]: 27 mm ; Outer diameter [mm]: 47 mm ; ArticleState: Normal ; General Information: Ajusa 15061800
|
|
|
|
|
WG1250093 |
Shaft Seal, camshaft |
Width [mm]: 7 mm ; Material: FPM (fluoride rubber) ; Inner diameter [mm]: 27 mm ; Outer diameter [mm]: 47 mm ; Swirl Type: Right-hand Twist ; Radial Shaft Seal Design: A SL ; ArticleState: Normal ; General Information: Reinz 81-34144-00
|
|
|
|
|
WG1004867 |
Shaft Seal, crankshaft |
Width [mm]: 7 mm ; Material: PTFE (polytetrafluoroethylene) ; Inner diameter [mm]: 90 mm ; Outer diameter [mm]: 110 mm ; Swirl Type: Left-hand Twist ; Radial Shaft Seal Design: A SL ; ArticleState: Normal ; General Information: Glaser P77465-01
|
|
|
|
|
WG1177363 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ; Height [mm]: 7 mm ; Material: PTFE (polytetrafluoroethylene) ; Inner diameter [mm]: 90 mm ; Outer diameter [mm]: 110 mm ; Radial Shaft Seal Design: 829S LD W ; Rotation Direction: Anti-clockwise rotation ; ArticleState: Normal ; General Information: Payen NA5192
|
|
|
|
|
WG1250292 |
Shaft Seal, crankshaft |
Width [mm]: 7 mm ; Material: PTFE (polytetrafluoroethylene) ; Inner diameter [mm]: 42 mm ; Outer diameter [mm]: 62 mm ; Swirl Type: Right-hand Twist ; Radial Shaft Seal Design: A SL ; Supplementary Article/Info 2: with mounting sleeve ; ArticleState: Normal ; General Information: Reinz 81-36557-00
|
|
|
|
|
WG1004737 |
Shaft Seal, camshaft |
Width [mm]: 7 mm ; Material: FPM (fluoride rubber) ; Inner diameter [mm]: 27 mm ; Outer diameter [mm]: 47 mm ; Swirl Type: Right-hand Twist ; Radial Shaft Seal Design: A SL ; ArticleState: Normal ; General Information: Glaser P77142-01
|
|
|
|
|
WG1189713 |
Shaft Seal, camshaft |
Height [mm]: 7 mm ; Material: FPM (fluoride rubber) ; Inner diameter [mm]: 27 mm ; Outer diameter [mm]: 47 mm ; Radial Shaft Seal Design: 829S RD ; Rotation Direction: Clockwise rotation ; ArticleState: Normal ; General Information: Goetze 50-319474-00
|
|
|
|
|
WG1431079 |
Shaft Seal, camshaft |
Fitting Position: Timing End ; Thickness [mm]: 7 mm ; Weight [kg]: 0,015 kg ; Required quantity: 1 ; Material: FPM (fluoride rubber)/ACM (polyacrylate rubber) ; Inner diameter [mm]: 27 mm ; Outer diameter [mm]: 47 mm ; ArticleState: Normal ; General Information: Swag 62919571
|
|
|
|
|
WG1087870 |
Shaft Seal, crankshaft |
Thickness [mm]: 7 mm ; Width [mm]: 7 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Inner diameter [mm]: 90 mm ; Outer diameter [mm]: 110 mm ; Swirl Type: Left-hand Twist ; Radial Shaft Seal Design: ASW ; Dust Cover: with dust lip ; Supplementary Article/Info 2: with mounting sleeve ; ArticleState: Normal ; General Information: Elring 394.011
|
|
|
|
|
WG1192498 |
Shaft Seal, crankshaft |
Thickness [mm]: 7 mm ; Width [mm]: 7 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Inner diameter [mm]: 42 mm ; Outer diameter [mm]: 62 mm ; Swirl Type: Right-hand Twist ; Radial Shaft Seal Design: ASW ; Dust Cover: with dust lip ; Supplementary Article/Info 2: with mounting sleeve ; ArticleState: Normal ; General Information: Elring 393.990
|
|
|
|
|