| Supplier |
Number |
Part name |
Criteria |
Show Article Details |
|
| ELRING |
154.080 |
Seal, oil drain plug |
Fitting Position: Wheel Side ;
Braking / Drive Dynamics: for vehicles with ABS ;
Drive Type: Front Wheel Drive ;
Chassis number from: 4A-M-000001 ;
Chassis number to: 4A-R-150000 ;
Inner diameter [mm]: 24.2 mm ;
Outer diameter [mm]: 35.9 mm ;
Thickness [mm]: 3 mm ;
Material: FPM (fluoride rubber) ;
Shape: A-shape ;
Gasket Design: Steel Elastomer ;
ArticleState: Normal
|
|
|
|
|
| 152.320 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: ASW ;
Swirl Type: Right-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| 125.771 |
Seal, valve stem |
Required quantity: 24 ;
Diameter 1 [mm]: 10 mm ;
Diameter 2 [mm]: 12.8 mm ;
Diameter 3 [mm]: 16.2 mm ;
Height [mm]: 9.5 mm ;
Material: FPM (fluoride rubber) ;
ArticleState: Normal
|
|
|
|
|
| 090.510 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: ASW ;
Swirl Type: Left-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| FEBI BILSTEIN |
31057 |
Seal, valve stem |
Fitting Position: Transmission End ;
Fitting Position: Front Axle ;
Thickness [mm]: 9.4 mm ;
Outer diameter [mm]: 16.2 mm ;
Colour: Green ;
Weight [kg]: 0.005 kg ;
Inner diameter 1 [mm]: 8.8 mm ;
Inner diameter 2 [mm]: 12.45 mm ;
ArticleState: Normal ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
| 09895 |
Shaft Seal, crankshaft |
Thickness [mm]: 15 mm ;
Inner diameter [mm]: 130 mm ;
Outer diameter [mm]: 160 mm ;
Material: MVQ (Silicone Elastomer) ;
Fitting Position: Transmission End ;
Weight [kg]: 0.105 kg ;
ArticleState: Normal ;
General Information: für Schwungrad
;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
| GLASER |
P76890-00 |
Seal, valve stem |
Braking / Drive Dynamics: for vehicles with ABS ;
Drive Type: Front Wheel Drive ;
Chassis number from: 4A-M-000001 ;
Chassis number to: 4A-R-150000 ;
ArticleState: Normal
|
|
|
|
|
| P77750-01 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| P77749-01 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: without twist ;
ArticleState: Normal
|
|
|
|
|
| GOETZE |
50-319620-00 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Height [mm]: 13 mm ;
Rotation Direction: Anti-clockwise rotation ;
Inner diameter [mm]: 145 mm ;
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Outer diameter [mm]: 175 mm ;
ArticleState: in Preparation
|
|
|
|
|
| 50-307067-50 |
Seal, valve stem |
Construction year from: 09.1997 ;
Required quantity: 24 ;
TecDoc Engine Number: SCANIA DSC 12.05 ;
Construction year from: 09.1998 ;
TecDoc Engine Number: SCANIA DC 12.01 ;
Height [mm]: 10 mm ;
Material: FPM (fluoride rubber) ;
Outer diameter [mm]: 16.2 mm ;
Radial Shaft Seal Design: 866N W ;
Inner diameter 1 [mm]: 10 mm ;
Inner diameter 2 [mm]: 12.8 mm ;
ArticleState: Normal
|
|
|
|
|
| PAYEN |
PA6063 |
Seal, valve stem |
Construction year from: 09.1997 ;
Required quantity: 24 ;
TecDoc Engine Number: SCANIA DSC 12.05 ;
Construction year from: 09.1998 ;
TecDoc Engine Number: SCANIA DC 12.01 ;
Fitting Position: Front Axle ;
Transmission Type: Manual Transmission ;
Height [mm]: 10 mm ;
Material: FPM (fluoride rubber) ;
Inner diameter [mm]: 10 mm ;
Outer diameter [mm]: 16.2 mm ;
Radial Shaft Seal Design: 866N W ;
Inner diameter 1 [mm]: 12.8 mm ;
Inner diameter 2 [mm]: 12.8 mm ;
ArticleState: Normal
|
|
|
|
|
| NA5300 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Height [mm]: 12 mm ;
Rotation Direction: Clockwise rotation ;
Radial Shaft Seal Design: ASW ;
Inner diameter [mm]: 120 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Outer diameter [mm]: 140 mm ;
ArticleState: Normal
|
|
|
|
|
| SAMPA |
041.153 |
Shaft Seal, camshaft |
Fitting Position: Transmission End ;
Fitting Position: Front Axle ;
Transmission Type: Manual Transmission ;
Inner diameter [mm]: 35 mm ;
Outer diameter [mm]: 62 mm ;
Height [mm]: 7 mm ;
Material: ACM (Polyacrylate) ;
ArticleState: Normal
|
|
|
|
|
| 041.146 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Fitting Position: Front Axle ;
Transmission Type: Manual Transmission ;
Fitting Position: Transmission End ;
Inner diameter [mm]: 130 mm ;
Outer diameter [mm]: 160 mm ;
Height [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene) ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| 042.036 |
Seal, oil drain plug |
New Part: ;
Fitting Position: Wheel Side ;
Fitting Position: Front Axle ;
Braking / Drive Dynamics: for vehicles with ABS ;
Chassis number from: 4AM000001 ;
Chassis number to: 4AR150000 ;
Inner diameter [mm]: 24.2 mm ;
Outer diameter [mm]: 36 mm ;
Height [mm]: 4.2 mm ;
Material: FPM (fluoride rubber) ;
ArticleState: Normal
|
|
|
|
|
| 041.143 |
Shaft Seal, crankshaft |
Weight [kg]: 0.38 kg ;
Fitting Position: Timing End ;
Inner diameter [mm]: 130 mm ;
Outer diameter [mm]: 160 mm ;
Height [mm]: 15 mm ;
Material: FPM (fluoride rubber) ;
ArticleState: Normal
|
|
|
|
|
| 041.147 |
Shaft Seal, crankshaft |
Fitting Position: Wheel Side ;
Fitting Position: Front Axle ;
Transmission Type: Manual Transmission ;
Fitting Position: Transmission End ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Height [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
ArticleState: Normal
|
|
|
|
|
| 041.145 |
Shaft Seal, crankshaft |
Fitting Position: Front Axle ;
Transmission Type: Manual Transmission ;
Fitting Position: Timing End ;
Inner diameter [mm]: 80 mm ;
Outer diameter [mm]: 100 mm ;
Height [mm]: 12 mm ;
Material: FPM (fluoride rubber) ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| 041.149 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Inner diameter [mm]: 80 mm ;
Outer diameter [mm]: 100 mm ;
Height [mm]: 12.75 mm ;
Material: PTFE (polytetrafluoroethylene) ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| STELLOX |
81-01377-SX |
Shaft Seal, crankshaft |
Fitting Position: Front Axle ;
Construction year to: 07.1998 ;
Fitting Position: Upper Right ;
Fitting Position: Timing End ;
Height 1 [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Swirl Type: Right-hand Twist ;
Dust Cover: with dust lip ;
Outer diameter 1 [mm]: 140 mm ;
Inner diameter 1 [mm]: 120 mm ;
ArticleState: Normal
|
|
|
|
|
| VICTOR REINZ |
70-36004-10 |
Seal, valve stem |
Fitting Position: Front Axle ;
Transmission Type: Manual Transmission ;
ArticleState: Normal
|
|
|
|
|
| 81-35996-00 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: without twist ;
ArticleState: Normal
|
|
|
|
|
| 81-35997-00 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| WILMINK GROUP |
WG1103736 |
Seal, valve stem |
ArticleState: Normal ;
General Information: Reinz 70-36004-10
|
|
|
|
|
| WG1151028 |
Shaft Seal, crankshaft |
Width [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: ASW ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 090.510
|
|
|
|
|
| WG1250274 |
Shaft Seal, crankshaft |
Width [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Swirl Type: without twist ;
Radial Shaft Seal Design: A SL ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Reinz 81-35996-00
|
|
|
|
|
| WG1189680 |
Seal, valve stem |
Construction year from: 09.1998 ;
Required quantity: 24 ;
TecDoc Engine Number: SCANIA DC 12.01 ;
Construction year from: 09.1997 ;
TecDoc Engine Number: SCANIA DSC 12.05 ;
Height [mm]: 10 mm ;
Material: FPM (fluoride rubber) ;
Outer diameter [mm]: 16.2 mm ;
Radial Shaft Seal Design: 866N W ;
Inner diameter 1 [mm]: 10 mm ;
Inner diameter 2 [mm]: 12.8 mm ;
ArticleState: Normal ;
General Information: Goetze 50-307067-50
|
|
|
|
|
| WG1151030 |
Shaft Seal, crankshaft |
Width [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: ASW ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 152.320
|
|
|
|
|
| WG1250275 |
Shaft Seal, crankshaft |
Width [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: A SL ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Reinz 81-35997-00
|
|
|
|
|
| WG1190906 |
Seal, oil drain plug |
New Part: ;
Fitting Position: Wheel Side ;
Fitting Position: Rear Axle ;
Braking / Drive Dynamics: for vehicles with ABS ;
Chassis number from: 4AM000001 ;
Chassis number to: 4AR150000 ;
Thickness [mm]: 3 mm ;
Shape: A-shape ;
Material: FPM (fluoride rubber) ;
Inner diameter [mm]: 24.2 mm ;
Outer diameter [mm]: 35.9 mm ;
Gasket Design: Steel Elastomer ;
ArticleState: Normal ;
General Information: Elring 154.080
|
|
|
|
|
| WG1309153 |
Seal, valve stem |
Required quantity: 24 ;
Height [mm]: 9.5 mm ;
Diameter 1 [mm]: 10 mm ;
Diameter 2 [mm]: 12.8 mm ;
Diameter 3 [mm]: 16.2 mm ;
Material: FPM (fluoride rubber) ;
ArticleState: Normal ;
General Information: Elring 125.771
|
|
|
|
|
| WG1183270 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Height [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Radial Shaft Seal Design: ASW ;
Rotation Direction: Clockwise rotation ;
ArticleState: Normal ;
General Information: Payen NA5300
|
|
|
|
|
