Supplier |
Number |
Part name |
Criteria |
Show Article Details |
|
ELRING |
152.320 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Width [mm]: 12 mm ; Radial Shaft Seal Design: ASW ; Swirl Type: Right-hand Twist ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; ArticleState: Normal ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
090.510 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 145 mm ; Outer diameter [mm]: 175 mm ; Width [mm]: 13 mm ; Radial Shaft Seal Design: ASW ; Swirl Type: Left-hand Twist ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; ArticleState: Normal ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
ET ENGINETEAM |
LA001100 |
Thrust Washer, crankshaft |
ArticleState: Normal
|
|
|
|
|
LH001425 |
Main Bearings, crankshaft |
Oversize [mm]: 0.25 mm ; Quantity Unit: Set ; ArticleState: Normal
|
|
|
|
|
HK0161 |
Crankshaft |
ArticleState: Normal
|
|
|
|
|
LH001400 |
Main Bearings, crankshaft |
Standard Size [STD]: ; Quantity Unit: Set ; ArticleState: Normal
|
|
|
|
|
GLASER |
P77750-01 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ; Supplementary Article/Info 2: with mounting sleeve ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Width [mm]: 12 mm ; Radial Shaft Seal Design: A SL ; Swirl Type: Right-hand Twist ; ArticleState: Normal
|
|
|
|
|
P77749-01 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ; Supplementary Article/Info 2: with mounting sleeve ; Inner diameter [mm]: 145 mm ; Outer diameter [mm]: 175 mm ; Width [mm]: 13 mm ; Radial Shaft Seal Design: A SL ; Swirl Type: without twist ; ArticleState: Normal
|
|
|
|
|
GLYCO |
72-4072 STD |
Main Bearings, crankshaft |
Component Number: 72-4072 ; Standard Size [STD]: ; ArticleState: Normal
|
|
|
|
|
A232/4 STD |
Thrust Washer, crankshaft |
Component Number: 4681BF ; Standard Size [STD]: ; ArticleState: Normal
|
|
|
|
|
72-4072 0.25mm |
Main Bearings, crankshaft |
Component Number: 72-4072 ; Oversize [mm]: 0.25 mm ; ArticleState: Normal
|
|
|
|
|
H1103/7 STD |
Main Bearings, crankshaft |
Position / Degree: 1,2,3,4,5,6,7 º ; Component Number: 4681CP ; Standard Size [STD]: ; ArticleState: Normal
|
|
|
|
|
72-4072 0.50mm |
Main Bearings, crankshaft |
Component Number: 72-4072 ; Oversize [mm]: 0.5 mm ; ArticleState: Normal
|
|
|
|
|
GOETZE |
50-319620-00 |
Shaft Seal, crankshaft |
Construction year from: 09.1997 ; TecDoc Engine Number: SCANIA DSC 12.05 ; TecDoc Engine Number: SCANIA DC 12.03 ; Construction year from: 09.1998 ; TecDoc Engine Number: SCANIA DC 12.01 ; Fitting Position: Transmission End ; Height [mm]: 13 mm ; Rotation Direction: Anti-clockwise rotation ; Inner diameter [mm]: 145 mm ; Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ; Outer diameter [mm]: 175 mm ; ArticleState: in Preparation
|
|
|
|
|
IPSA |
MB097900 |
Crankshaft Bearing Set |
Quantity: 7 ; Quantity Unit: Kit ; for housing diameter [mm]: 112.222 mm ; for wall thickness [mm]: 2.063 mm ; Width [mm]: 34.4 mm ; Supplementary Article/Info 2: with steel back ; Supplementary Article/Info 2: with bearing metal running layer ; Supplementary Article/Info 2: with nickel diffusion barrier ; Supplementary Article/Info 2: with lead/bronze intermediate layer ; ArticleState: Normal
|
|
|
|
|
MB097901 |
Crankshaft Bearing Set |
Oversize [mm]: 0.25 mm ; Quantity: 7 ; Quantity Unit: Kit ; for housing diameter [mm]: 112.222 mm ; for wall thickness [mm]: 2.063 mm ; Width [mm]: 34.4 mm ; Supplementary Article/Info 2: with steel back ; Supplementary Article/Info 2: with bearing metal running layer ; Supplementary Article/Info 2: with nickel diffusion barrier ; Supplementary Article/Info 2: with lead/bronze intermediate layer ; ArticleState: Normal
|
|
|
|
|
MB097902 |
Crankshaft Bearing Set |
Oversize [mm]: 0.5 mm ; Quantity: 7 ; Quantity Unit: Kit ; for housing diameter [mm]: 112.222 mm ; for wall thickness [mm]: 2.063 mm ; Width [mm]: 34.4 mm ; Supplementary Article/Info 2: with steel back ; Supplementary Article/Info 2: with bearing metal running layer ; Supplementary Article/Info 2: with nickel diffusion barrier ; Supplementary Article/Info 2: with lead/bronze intermediate layer ; ArticleState: Normal
|
|
|
|
|
MAHLE ORIGINAL |
061 HS 19155 000 |
Crankshaft Bearing Set |
Component Number: 061HL19078000 ; for bearing clearance from [mm]: 0.06 mm ; to bearing clearance [mm]: 0.134 mm ; for housing diameter from [mm]: 112.2 mm ; to housing diameter [mm]: 112.222 mm ; Width from [mm]: 34.05 mm ; Width to [mm]: 34.3 mm ; for wall thickness from [mm]: 2.055 mm ; to wall thickness [mm]: 2.07 mm ; for shaft diamater from [mm]: 107.978 mm ; to shaft diameter [mm]: 108 mm ; ArticleState: only supplied in parts list
|
|
|
|
|
061 HS 19155 025 |
Crankshaft Bearing Set |
Oversize [mm]: 0.25 mm ; Component Number: 061HL19078025 ; for bearing clearance from [mm]: 0.06 mm ; to bearing clearance [mm]: 0.134 mm ; for housing diameter from [mm]: 112.2 mm ; to housing diameter [mm]: 112.222 mm ; Width from [mm]: 34.05 mm ; Width to [mm]: 34.3 mm ; for wall thickness from [mm]: 2.18 mm ; to wall thickness [mm]: 2.195 mm ; for shaft diamater from [mm]: 107.978 mm ; to shaft diameter [mm]: 108 mm ; ArticleState: only supplied in parts list
|
|
|
|
|
061 AS 20087 000 |
Thrust Washer, crankshaft |
Component Number: 061AL20086000 ; for housing diameter from [mm]: 143.7 mm ; to housing diameter [mm]: 144.1 mm ; for wall thickness from [mm]: 3.38 mm ; to wall thickness [mm]: 3.43 mm ; for shaft diamater from [mm]: 118.65 mm ; to shaft diameter [mm]: 119 mm ; ArticleState: Normal
|
|
|
|
|
061 HS 19155 050 |
Crankshaft Bearing Set |
Oversize [mm]: 0.5 mm ; Component Number: 061HL19078050 ; for bearing clearance from [mm]: 0.06 mm ; to bearing clearance [mm]: 0.134 mm ; for housing diameter from [mm]: 112.2 mm ; to housing diameter [mm]: 112.222 mm ; Width from [mm]: 34.05 mm ; Width to [mm]: 34.3 mm ; for wall thickness from [mm]: 2.305 mm ; to wall thickness [mm]: 2.32 mm ; for shaft diamater from [mm]: 107.978 mm ; to shaft diameter [mm]: 108 mm ; ArticleState: only supplied in parts list
|
|
|
|
|
PAYEN |
NA5300 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ; Height [mm]: 12 mm ; Rotation Direction: Clockwise rotation ; Radial Shaft Seal Design: ASW ; Inner diameter [mm]: 120 mm ; Material: PTFE (polytetrafluoroethylene) ; Outer diameter [mm]: 140 mm ; ArticleState: Normal
|
|
|
|
|
SAMPA |
041.143 |
Shaft Seal, crankshaft |
Weight [kg]: 0.38 kg ; Fitting Position: Timing End ; Inner diameter [mm]: 130 mm ; Outer diameter [mm]: 160 mm ; Height [mm]: 15 mm ; Material: FPM (fluoride rubber) ; ArticleState: Normal
|
|
|
|
|
041.147 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ; Inner diameter [mm]: 145 mm ; Outer diameter [mm]: 175 mm ; Height [mm]: 13 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; ArticleState: Normal
|
|
|
|
|
041.145 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ; Inner diameter [mm]: 80 mm ; Outer diameter [mm]: 100 mm ; Height [mm]: 12 mm ; Material: FPM (fluoride rubber) ; ArticleState: No longer supplied by manufacturer
|
|
|
|
|
041.149 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ; Inner diameter [mm]: 80 mm ; Outer diameter [mm]: 100 mm ; Height [mm]: 12.75 mm ; Material: PTFE (polytetrafluoroethylene) ; ArticleState: No longer supplied by manufacturer
|
|
|
|
|
021.261 |
Main Bearings, crankshaft |
Weight [kg]: 0.51 kg ; Inner diameter [mm]: 25 mm ; Outer diameter [mm]: 62 mm ; Height [mm]: 17 mm ; ArticleState: Normal
|
|
|
|
|
041.146 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ; Inner diameter [mm]: 130 mm ; Outer diameter [mm]: 160 mm ; Height [mm]: 13 mm ; Material: PTFE (polytetrafluoroethylene) ; ArticleState: No longer supplied by manufacturer
|
|
|
|
|
STELLOX |
81-01377-SX |
Shaft Seal, crankshaft |
Suspension: for vehicles with standard chassis ; Fitting Position: Timing End ; Height 1 [mm]: 12 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Swirl Type: Right-hand Twist ; Dust Cover: with dust lip ; Outer diameter 1 [mm]: 140 mm ; Inner diameter 1 [mm]: 120 mm ; ArticleState: Normal
|
|
|
|
|
VICTOR REINZ |
81-35996-00 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ; Supplementary Article/Info 2: with mounting sleeve ; Inner diameter [mm]: 145 mm ; Outer diameter [mm]: 175 mm ; Width [mm]: 13 mm ; Radial Shaft Seal Design: A SL ; Swirl Type: without twist ; ArticleState: Normal
|
|
|
|
|
81-35997-00 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ; Supplementary Article/Info 2: with mounting sleeve ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Width [mm]: 12 mm ; Radial Shaft Seal Design: A SL ; Swirl Type: Right-hand Twist ; ArticleState: Normal
|
|
|
|
|
WILMINK GROUP |
WG1213215 |
Crankshaft Bearing Set |
for wall thickness from [mm]: 2.055 mm ; to wall thickness [mm]: 2.07 mm ; for shaft diamater from [mm]: 107.978 mm ; to shaft diameter [mm]: 108 mm ; for housing diameter from [mm]: 112.2 mm ; to housing diameter [mm]: 112.222 mm ; for bearing clearance from [mm]: 0.06 mm ; to bearing clearance [mm]: 0.134 mm ; Width from [mm]: 34.05 mm ; Width to [mm]: 34.3 mm ; ArticleState: only supplied in parts list ; General Information: Mahle 061 HS 19155 000
|
|
|
|
|
WG1151030 |
Shaft Seal, crankshaft |
Width [mm]: 12 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Swirl Type: Right-hand Twist ; Radial Shaft Seal Design: ASW ; Dust Cover: with dust lip ; ArticleState: Normal ; General Information: Elring 152.320
|
|
|
|
|
WG1250275 |
Shaft Seal, crankshaft |
Width [mm]: 12 mm ; Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Swirl Type: Right-hand Twist ; Radial Shaft Seal Design: A SL ; Supplementary Article/Info 2: with mounting sleeve ; ArticleState: Normal ; General Information: Reinz 81-35997-00
|
|
|
|
|
WG1093922 |
Main Bearings, crankshaft |
Position / Degree: 1,2,3,4,5,6,7 º ; ArticleState: Normal ; General Information: Glyco H1103/7 STD
|
|
|
|
|
WG1185948 |
Thrust Washer, crankshaft |
ArticleState: Normal ; General Information: Glyco A232/4 STD
|
|
|
|
|
WG1260783 |
Crankshaft Bearing Set |
for wall thickness from [mm]: 2.18 mm ; to wall thickness [mm]: 2.195 mm ; for shaft diamater from [mm]: 107.978 mm ; to shaft diameter [mm]: 108 mm ; for housing diameter from [mm]: 112.2 mm ; to housing diameter [mm]: 112.222 mm ; for bearing clearance from [mm]: 0.06 mm ; to bearing clearance [mm]: 0.134 mm ; Oversize [mm]: 0.25 mm ; Width from [mm]: 34.05 mm ; Width to [mm]: 34.3 mm ; ArticleState: only supplied in parts list ; General Information: Mahle 061 HS 19155 025
|
|
|
|
|
WG1183270 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ; Height [mm]: 12 mm ; Material: PTFE (polytetrafluoroethylene) ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Radial Shaft Seal Design: ASW ; Rotation Direction: Clockwise rotation ; ArticleState: Normal ; General Information: Payen NA5300
|
|
|
|
|
WG1185824 |
Main Bearings, crankshaft |
Oversize [mm]: 0.25 mm ; ArticleState: Normal ; General Information: Glyco 72-4072 0.25MM
|
|
|
|
|
WG1260784 |
Crankshaft Bearing Set |
for wall thickness from [mm]: 2.305 mm ; to wall thickness [mm]: 2.32 mm ; for shaft diamater from [mm]: 107.978 mm ; to shaft diameter [mm]: 108 mm ; for housing diameter from [mm]: 112.2 mm ; to housing diameter [mm]: 112.222 mm ; for bearing clearance from [mm]: 0.06 mm ; to bearing clearance [mm]: 0.134 mm ; Oversize [mm]: 0.5 mm ; Width from [mm]: 34.05 mm ; Width to [mm]: 34.3 mm ; ArticleState: only supplied in parts list ; General Information: Mahle 061 HS 19155 050
|
|
|
|
|
WG1151028 |
Shaft Seal, crankshaft |
Width [mm]: 13 mm ; Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Inner diameter [mm]: 145 mm ; Outer diameter [mm]: 175 mm ; Swirl Type: Left-hand Twist ; Radial Shaft Seal Design: ASW ; Dust Cover: with dust lip ; ArticleState: Normal ; General Information: Elring 090.510
|
|
|
|
|
WG1250274 |
Shaft Seal, crankshaft |
Width [mm]: 13 mm ; Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ; Inner diameter [mm]: 145 mm ; Outer diameter [mm]: 175 mm ; Swirl Type: without twist ; Radial Shaft Seal Design: A SL ; Supplementary Article/Info 2: with mounting sleeve ; ArticleState: Normal ; General Information: Reinz 81-35996-00
|
|
|
|
|
WG1093791 |
Main Bearings, crankshaft |
ArticleState: Normal ; General Information: Glyco 72-4072 STD
|
|
|
|
|
WG1185825 |
Main Bearings, crankshaft |
Oversize [mm]: 0.5 mm ; ArticleState: Normal ; General Information: Glyco 72-4072 0.50MM
|
|
|
|
|