| Supplier |
Number |
Part name |
Criteria |
Show Article Details |
|
| AJUSA |
15083100 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 35 mm ;
Outer diameter [mm]: 48 mm ;
Width [mm]: 10 mm ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| 71000600 |
Shaft Seal, crankshaft |
Housing Type: with housing ;
Inner diameter [mm]: 85 mm ;
Outer diameter [mm]: 101 mm ;
Outer diameter [mm]: 155 mm ;
Width [mm]: 16 mm ;
ArticleState: Normal
|
|
|
|
|
| BGA |
OS8372 |
Shaft Seal, crankshaft |
Shape: Round ;
Swirl Type: Right-hand Twist ;
Width 1 [mm]: 10 mm ;
Outer diameter 1 [mm]: 48 mm ;
Inner diameter 1 [mm]: 35 mm ;
ArticleState: Normal
|
|
|
|
|
| OC6397 |
Shaft Seal, crankshaft |
Shape: Round ;
Housing Type: with housing ;
Width 1 [mm]: 16 mm ;
Outer diameter 1 [mm]: 101 mm ;
Outer diameter 2 [mm]: 155 mm ;
Inner diameter 1 [mm]: 85 mm ;
ArticleState: Normal
|
|
|
|
|
| OS5391 |
Shaft Seal, crankshaft |
Shape: Round ;
Swirl Type: Left-hand Twist ;
Width 1 [mm]: 10 mm ;
Outer diameter 1 [mm]: 47 mm ;
Inner diameter 1 [mm]: 32 mm ;
ArticleState: Normal
|
|
|
|
|
| BUGIAD |
BSP20444 |
Shaft Seal, crankshaft |
Outer diameter [mm]: 131 mm ;
Inner diameter [mm]: 85 mm ;
Fitting Position: Transmission End ;
ArticleState: Normal
|
|
|
|
|
| CORTECO |
289076 |
Shaft Seal Set, engine |
Fitting Position: Pulley side ;
Version: ____ ;
ArticleState: Normal
|
|
|
|
|
| 289078 |
Shaft Seal Set, engine |
Fitting Position: Pulley side ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| 20020383B |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Inner diameter 1 [mm]: 85 mm ;
Outer diameter 1 [mm]: 131 mm ;
Outer diameter 2 [mm]: 152 mm ;
Height 1 [mm]: 15,7 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Supplementary Article/Info 2: with flange ;
Supplementary Article/Info 2: with mounting sleeves ;
ArticleState: Normal
|
|
|
|
|
| 20026412B |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Inner diameter 1 [mm]: 35 mm ;
Outer diameter 1 [mm]: 48 mm ;
Height 1 [mm]: 10 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Swirl Type: Right-hand Twist ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeves ;
ArticleState: Normal
|
|
|
|
|
| ELRING |
012.370 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 85 mm ;
Radial Shaft Seal Design: IWD ;
Swirl Type: Left-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Housing Type: with housing ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| 155.560 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 35 mm ;
Outer diameter [mm]: 48 mm ;
Width [mm]: 10 mm ;
Radial Shaft Seal Design: ASW ;
Swirl Type: Right-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| ELWIS ROYAL |
8456050 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Required quantity: 1 ;
Width [mm]: 10 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 35 mm ;
Outer diameter [mm]: 48 mm ;
ArticleState: Normal
|
|
|
|
|
| FAI AutoParts |
OS1009 |
Shaft Seal, crankshaft |
Equipment Variant: ROTOSTAT ;
Equipment Variant: for 6mm sump bolts ;
Material: PTFE (polytetrafluoroethylene) ;
ArticleState: Normal
|
|
|
|
|
| OS1009A |
Shaft Seal, crankshaft |
Equipment Variant: ROTOSTAT ;
Equipment Variant: +Crank Sensor Mount ;
ArticleState: Normal
|
|
|
|
|
| OS1315 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 35 mm ;
Outer diameter [mm]: 48 mm ;
Width [mm]: 10 mm ;
ArticleState: Normal
|
|
|
|
|
| FEBI BILSTEIN |
32471 |
Shaft Seal, crankshaft |
Thickness [mm]: 10 mm ;
Inner diameter [mm]: 35 mm ;
Outer diameter [mm]: 48 mm ;
Fitting Position: Timing End ;
Weight [kg]: 0,01 kg ;
ArticleState: Normal ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
| 36382 |
Shaft Seal, crankshaft |
Thickness [mm]: 15,7 mm ;
Inner diameter [mm]: 85 mm ;
Outer diameter [mm]: 131 mm ;
Outer diameter [mm]: 152 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Supplementary Article/Info 2: with flange ;
Fitting Position: Transmission End ;
Weight [kg]: 0,16 kg ;
ArticleState: Normal ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
| GLASER |
P76096-11 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ;
Material: ACM (Polyacrylate) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 35 mm ;
Outer diameter [mm]: 48 mm ;
Width [mm]: 10 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| P77183-01 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ;
Supplementary Article/Info 2: with mounting sleeve ;
Version: integrierter Wedi ;
ArticleState: Normal
|
|
|
|
|
| GOETZE |
50-319434-00 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Height [mm]: 15,7 mm ;
Radial Shaft Seal Design: 841S LD SP ;
Inner diameter [mm]: 85 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Outer diameter [mm]: 131 mm ;
ArticleState: Normal ;
Technical Information: Integrierte Dichtung und Gehaeuse
|
|
|
|
|
| 50-319430-00 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Height [mm]: 10 mm ;
Rotation Direction: Clockwise rotation ;
Radial Shaft Seal Design: 827S RD W ;
Inner diameter [mm]: 35 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Outer diameter [mm]: 48 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
ArticleState: Normal
|
|
|
|
|
| JP GROUP |
1119500200 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 35 mm ;
Outer diameter [mm]: 48 mm ;
Width [mm]: 10 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
ArticleState: Normal
|
|
|
|
|
| KRAFT AUTOMOTIVE |
1150015 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 85 mm ;
Outer diameter [mm]: 101 mm ;
Outer diameter [mm]: 151 mm ;
Width [mm]: 16 mm ;
Housing Type: with housing ;
Fitting Position: Transmission End ;
Production Number: 1150015 ;
ArticleState: on demand
|
|
|
|
|
| 1150252 |
Shaft Seal, crankshaft |
Housing Type: with housing ;
Inner diameter [mm]: 85 mm ;
Outer diameter [mm]: 101 mm ;
Outer diameter [mm]: 155 mm ;
Width [mm]: 16 mm ;
Fitting Position: Transmission End ;
Production Number: 1150252 ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| MALÒ |
912PTF |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ;
for article number: 912PTF ;
Outer diameter [mm]: 48 mm ;
Fitting Position: Timing End ;
Inner diameter [mm]: 35 mm ;
Height [mm]: 10 mm ;
ArticleState: Normal
|
|
|
|
|
| MEYLE |
100 103 1010 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Inner diameter [mm]: 85 mm ;
Outer diameter [mm]: 131 mm ;
Swirl Type: Left-hand Twist ;
Supplementary Article/Info 2: with mounting sleeve ;
Housing Type: Synthetic Material Housing ;
Material: PTFE (polytetrafluoroethylene) ;
ArticleState: Normal
|
|
|
|
|
| OSSCA |
04895 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Shape: O-shape ;
Outer diameter [mm]: 131 mm ;
Inner diameter [mm]: 85 mm ;
Width [mm]: 15,7 mm ;
ArticleState: Normal
|
|
|
|
|
| PAYEN |
LK5003 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Height [mm]: 15,7 mm ;
Rotation Direction: Anti-clockwise rotation ;
Specification: Oil Seal in housing ;
Inner diameter [mm]: 85 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Outer diameter [mm]: 131 mm ;
ArticleState: Normal
|
|
|
|
|
| NA5106 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Height [mm]: 10 mm ;
Rotation Direction: Clockwise rotation ;
Radial Shaft Seal Design: 827S RD W ;
Inner diameter [mm]: 35 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Outer diameter [mm]: 48 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
ArticleState: Normal
|
|
|
|
|
| STELLOX |
34-00007-SX |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Height 1 [mm]: 10 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Swirl Type: Right-hand Twist ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeves ;
Outer diameter 1 [mm]: 48 mm ;
Inner diameter 1 [mm]: 35 mm ;
ArticleState: Normal
|
|
|
|
|
| SWAG |
30 93 2471 |
Shaft Seal, crankshaft |
Thickness [mm]: 10 mm ;
Inner diameter [mm]: 35 mm ;
Outer diameter [mm]: 48 mm ;
Fitting Position: Timing End ;
Weight [kg]: 0,01 kg ;
ArticleState: Normal ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
| 30 93 6382 |
Shaft Seal, crankshaft |
Thickness [mm]: 15,7 mm ;
Inner diameter [mm]: 85 mm ;
Outer diameter [mm]: 131 mm ;
Outer diameter [mm]: 152 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Supplementary Article/Info 2: with flange ;
Fitting Position: Transmission End ;
Weight [kg]: 0,16 kg ;
ArticleState: Normal ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
| TOPRAN |
109 382 |
Shaft Seal, crankshaft |
Height [mm]: 10 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 32 mm ;
Outer diameter [mm]: 47 mm ;
Fitting Position: Transmission End ;
Fitting Position: Timing End ;
ArticleState: Normal
|
|
|
|
|
| 109 383 |
Shaft Seal, crankshaft |
Outer diameter [mm]: 48 mm ;
Inner diameter [mm]: 35 mm ;
Height [mm]: 10 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
ArticleState: Normal
|
|
|
|
|
| 109 613 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Supplementary Article/Supplementary Info: Integrated shaft seal ;
Supplementary Article/Info 2: with flange ;
Sealing lip material: PTFE (polytetrafluoroethylene) ;
ArticleState: Normal ;
General Information: Dichtflansch mit Wellendichtung
|
|
|
|
|
| TRISCAN |
8550 10050 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Inner diameter 1 [mm]: 35 mm ;
Outer diameter 1 [mm]: 48 mm ;
Height 1 [mm]: 10 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Swirl Type: Right-hand Twist ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeves ;
ArticleState: Normal
|
|
|
|
|
| 8550 10048 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Inner diameter 1 [mm]: 85 mm ;
Outer diameter 1 [mm]: 131 mm ;
Outer diameter 2 [mm]: 152 mm ;
Height 1 [mm]: 15,7 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Supplementary Article/Info 2: with flange ;
Supplementary Article/Info 2: with mounting sleeves ;
ArticleState: Normal
|
|
|
|
|
| VAICO |
V10-3275 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
for OE number: 03G 105 021 C ;
Thickness [mm]: 10 mm ;
Inner diameter [mm]: 35 mm ;
Outer diameter [mm]: 48 mm ;
ArticleState: Normal ;
General Information:
https://www.autoteile.de/produkt/V10-3275
|
|
|
|
|
| V10-3332 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
ArticleState: Normal ;
General Information:
https://www.autoteile.de/produkt/V10-3332
|
|
|
|
|
| V10-3260 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
for OE number: 038 103 085 C ;
Thickness [mm]: 10 mm ;
Inner diameter [mm]: 32 mm ;
Outer diameter [mm]: 47 mm ;
ArticleState: Normal ;
General Information:
https://www.autoteile.de/produkt/V10-3260
|
|
|
|
|
| V10-3260-1 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
for OE number: 038 103 085 C ;
Thickness [mm]: 10 mm ;
Inner diameter [mm]: 32 mm ;
Outer diameter [mm]: 47 mm ;
Alternatively: ;
ArticleState: Article to be discontinued ;
General Information:
https://www.autoteile.de/produkt/V10-3260-1
|
|
|
|
|
| VICTOR REINZ |
81-34366-00 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ;
Material: ACM (Polyacrylate) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 35 mm ;
Outer diameter [mm]: 48 mm ;
Width [mm]: 10 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| 81-90010-00 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ;
Supplementary Article/Info 2: with mounting sleeve ;
Version: integrierter Wedi ;
ArticleState: Normal
|
|
|
|
|
| WILMINK GROUP |
WG1103936 |
Shaft Seal, crankshaft |
Width [mm]: 10 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Material: ACM (Polyacrylate) ;
Inner diameter [mm]: 35 mm ;
Outer diameter [mm]: 48 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: A SL ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Reinz 81-34366-00
|
|
|
|
|
| WG1004756 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Glaser P77183-01
|
|
|
|
|
| WG1177354 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Height [mm]: 10 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 35 mm ;
Outer diameter [mm]: 48 mm ;
Radial Shaft Seal Design: 827S RD W ;
Rotation Direction: Clockwise rotation ;
ArticleState: Normal ;
General Information: Payen NA5106
|
|
|
|
|
| WG1103989 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Reinz 81-90010-00
|
|
|
|
|
| WG1086441 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 85 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: IWD ;
Housing Type: with housing ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Elring 012.370
|
|
|
|
|
| WG1428878 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Thickness [mm]: 10 mm ;
Weight [kg]: 0,01 kg ;
Required quantity: 1 ;
Inner diameter [mm]: 35 mm ;
Outer diameter [mm]: 48 mm ;
ArticleState: Normal ;
General Information: Swag 30932471
|
|
|
|
|
| WG1163600 |
Shaft Seal, crankshaft |
Width [mm]: 10 mm ;
Inner diameter [mm]: 35 mm ;
Outer diameter [mm]: 48 mm ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal ;
General Information: Ajusa 15083100
|
|
|
|
|
| WG1086708 |
Shaft Seal, crankshaft |
Width [mm]: 10 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 35 mm ;
Outer diameter [mm]: 48 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: ASW ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 155.560
|
|
|
|
|
| WG1004473 |
Shaft Seal, crankshaft |
Width [mm]: 10 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Material: ACM (Polyacrylate) ;
Inner diameter [mm]: 35 mm ;
Outer diameter [mm]: 48 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: A SL ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Glaser P76096-11
|
|
|
|
|
| WG1755277 |
Shaft Seal Set, engine |
Fitting Position: Pulley side ;
ArticleState: Normal ;
General Information: Corteco 289076
|
|
|
|
|
| WG1429025 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Thickness [mm]: 15,7 mm ;
Weight [kg]: 0,16 kg ;
Required quantity: 1 ;
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 85 mm ;
Outer diameter [mm]: 131 mm ;
Outer diameter [mm]: 152 mm ;
Supplementary Article/Info 2: with flange ;
ArticleState: Normal ;
General Information: Swag 30936382
|
|
|
|
|
| WG1177337 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Height [mm]: 15,7 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 85 mm ;
Outer diameter [mm]: 131 mm ;
Rotation Direction: Anti-clockwise rotation ;
Specification: Oil Seal in housing ;
ArticleState: Normal ;
General Information: Payen LK5003
|
|
|
|
|
