| Supplier |
Number |
Part name |
Criteria |
Show Article Details |
|
| ELRING |
000.270 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 136 mm ;
Outer diameter [mm]: 159 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: ASW ;
Swirl Type: Right-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| 081.460 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 180 mm ;
Outer diameter [mm]: 205 mm ;
Width [mm]: 15 mm ;
Radial Shaft Seal Design: AW/BS ;
Swirl Type: Left-hand Twist ;
Material: FPM (fluoride rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal
|
|
|
|
|
| 038.690 |
Seal, valve stem |
Diameter 1 [mm]: 8 mm ;
Diameter 2 [mm]: 11.6 mm ;
Diameter 3 [mm]: 14.8 mm ;
Height [mm]: 10.9 mm ;
Material: FPM (fluoride rubber) ;
ArticleState: Normal
|
|
|
|
|
| 453.851 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 180 mm ;
Outer diameter [mm]: 205 mm ;
Width [mm]: 15 mm ;
Radial Shaft Seal Design: AW ;
Swirl Type: Left-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| FEBI BILSTEIN |
39899 |
Shaft Seal, crankshaft |
Width [mm]: 15 mm ;
Inner diameter [mm]: 150 mm ;
Outer diameter [mm]: 180 mm ;
Fitting Position: Transmission End ;
Weight [kg]: 0.165 kg ;
ArticleState: Normal ;
General Information: für Schwungrad
;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
| 39948 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 178 mm ;
Outer diameter [mm]: 205 mm ;
Material: ACM (Polyacrylate) ;
Material: PTFE (polytetrafluoroethylene) ;
Fitting Position: Transmission End ;
Weight [kg]: 0.288 kg ;
ArticleState: Normal ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
| GLASER |
P77476-01 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 136 mm ;
Outer diameter [mm]: 159 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| P76895-00 |
Seal, valve stem |
ArticleState: Normal
|
|
|
|
|
| P77805-01 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Inner diameter [mm]: 180 mm ;
Outer diameter [mm]: 205 mm ;
Width [mm]: 15 mm ;
Radial Shaft Seal Design: A SL ;
ArticleState: Normal
|
|
|
|
|
| GOETZE |
50-319558-00 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Height [mm]: 15 mm ;
Rotation Direction: Anti-clockwise rotation ;
Inner diameter [mm]: 180 mm ;
Material: FPM (fluoride rubber) ;
Outer diameter [mm]: 205 mm ;
ArticleState: Normal
|
|
|
|
|
| 50-319609-00 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Height [mm]: 13 mm ;
Rotation Direction: Clockwise rotation ;
Inner diameter [mm]: 136 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Outer diameter [mm]: 159 mm ;
ArticleState: Normal
|
|
|
|
|
| PAYEN |
NA5461 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Height [mm]: 13 mm ;
Rotation Direction: Clockwise rotation ;
Inner diameter [mm]: 136 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Outer diameter [mm]: 159 mm ;
ArticleState: Normal
|
|
|
|
|
| NA5359 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Height [mm]: 15 mm ;
Rotation Direction: Anti-clockwise rotation ;
Inner diameter [mm]: 180 mm ;
Material: FPM (fluoride rubber) ;
Outer diameter [mm]: 205 mm ;
ArticleState: Normal
|
|
|
|
|
| VICTOR REINZ |
70-37804-00 |
Seal, valve stem |
ArticleState: Normal
|
|
|
|
|
| 81-35206-10 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Inner diameter [mm]: 180 mm ;
Outer diameter [mm]: 205 mm ;
Width [mm]: 15 mm ;
Radial Shaft Seal Design: A SL ;
ArticleState: Normal
|
|
|
|
|
| 81-38651-00 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 136 mm ;
Outer diameter [mm]: 159 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| WILMINK GROUP |
WG1150141 |
Seal, valve stem |
Height [mm]: 10.9 mm ;
Diameter 1 [mm]: 8 mm ;
Diameter 2 [mm]: 11.6 mm ;
Diameter 3 [mm]: 14.8 mm ;
Material: FPM (fluoride rubber) ;
ArticleState: Normal ;
General Information: Elring 038.690
|
|
|
|
|
