| Supplier |
Number |
Part name |
Criteria |
Show Article Details |
|
| AJUSA |
15065800 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 90 mm ;
Outer diameter [mm]: 110 mm ;
Width [mm]: 11 mm ;
ArticleState: Normal
|
|
|
|
|
| 15065500 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 150 mm ;
Outer diameter [mm]: 172 mm ;
Width [mm]: 13 mm ;
ArticleState: Normal
|
|
|
|
|
| CORTECO |
15026914B |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Inner diameter 1 [mm]: 90 mm ;
Outer diameter 1 [mm]: 110 mm ;
Height 1 [mm]: 11 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Dust Cover: with dust lip ;
Swirl Type: Right-hand Twist ;
Supplementary Article/Info 2: with mounting sleeves ;
ArticleState: Normal
|
|
|
|
|
| 20026913B |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Inner diameter 1 [mm]: 150 mm ;
Outer diameter 1 [mm]: 172 mm ;
Height 1 [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Swirl Type: Left-hand Twist ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeves ;
ArticleState: Normal
|
|
|
|
|
| ELRING |
453.930 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 90 mm ;
Outer diameter [mm]: 110 mm ;
Width [mm]: 11 mm ;
Radial Shaft Seal Design: ASW ;
Swirl Type: Right-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| 457.220 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 150 mm ;
Outer diameter [mm]: 172 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: ASW ;
Swirl Type: Left-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeve ;
Thickness [mm]: 13 mm ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| GLASER |
P77004-01 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 150 mm ;
Outer diameter [mm]: 172 mm ;
Width [mm]: 13 mm ;
ArticleState: Normal
|
|
|
|
|
| P77005-01 |
Shaft Seal, crankshaft |
Material: FPM (fluoride rubber) ;
Inner diameter [mm]: 85 mm ;
Outer diameter [mm]: 100 mm ;
Width [mm]: 13 mm ;
Swirl Type: Left-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| GOETZE |
50-305115-10 |
Shaft Seal, crankshaft |
TecDoc Engine Number: RENAULT MIDR 06.20.45 D3 ;
Fitting Position: Transmission End ;
Height [mm]: 13 mm ;
Rotation Direction: Anti-clockwise rotation ;
Radial Shaft Seal Design: 829S LD ;
Inner diameter [mm]: 110 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Outer diameter [mm]: 130 mm ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| MEYLE |
16-34 099 0003 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Inner diameter [mm]: 90 mm ;
Outer diameter [mm]: 110 mm ;
Height [mm]: 11 mm ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| 16-34 099 0004 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Inner diameter [mm]: 150 mm ;
Outer diameter [mm]: 172 mm ;
Height [mm]: 13 mm ;
Swirl Type: Left-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| PAYEN |
NA5181 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Height [mm]: 13 mm ;
Rotation Direction: Anti-clockwise rotation ;
Radial Shaft Seal Design: 829S LD W ;
Inner diameter [mm]: 110 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Outer diameter [mm]: 130 mm ;
ArticleState: Normal
|
|
|
|
|
| NF832 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Height [mm]: 11 mm ;
Rotation Direction: Clockwise rotation ;
Radial Shaft Seal Design: Sp ;
Inner diameter [mm]: 90 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Outer diameter [mm]: 110 mm ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| VICTOR REINZ |
81-37933-00 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 150 mm ;
Outer diameter [mm]: 172 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Left-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| 81-37914-00 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 90 mm ;
Outer diameter [mm]: 110 mm ;
Width [mm]: 11 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| WILMINK GROUP |
WG1250333 |
Shaft Seal, crankshaft |
Width [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 150 mm ;
Outer diameter [mm]: 172 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: A SL ;
ArticleState: Normal ;
General Information: Reinz 81-37933-00
|
|
|
|
|
| WG1223983 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Height 1 [mm]: 11 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Swirl Type: Right-hand Twist ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeves ;
Outer diameter 1 [mm]: 110 mm ;
Inner diameter 1 [mm]: 90 mm ;
ArticleState: Normal ;
General Information: Corteco 15026914B
|
|
|
|
|
| WG1183226 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Height [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 110 mm ;
Outer diameter [mm]: 130 mm ;
Radial Shaft Seal Design: 829S LD W ;
Rotation Direction: Anti-clockwise rotation ;
ArticleState: Normal ;
General Information: Payen NA5181
|
|
|
|
|
| WG1226525 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Height 1 [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Swirl Type: Left-hand Twist ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeves ;
Outer diameter 1 [mm]: 172 mm ;
Inner diameter 1 [mm]: 150 mm ;
ArticleState: Normal ;
General Information: Corteco 20026913B
|
|
|
|
|
| WG1192858 |
Shaft Seal, crankshaft |
Width [mm]: 11 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 90 mm ;
Outer diameter [mm]: 110 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: ASW ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Elring 453.930
|
|
|
|
|
| WG1163445 |
Shaft Seal, crankshaft |
Width [mm]: 13 mm ;
Inner diameter [mm]: 150 mm ;
Outer diameter [mm]: 172 mm ;
ArticleState: Normal ;
General Information: Ajusa 15065500
|
|
|
|
|
| WG1250328 |
Shaft Seal, crankshaft |
Width [mm]: 11 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 90 mm ;
Outer diameter [mm]: 110 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: A SL ;
ArticleState: Normal ;
General Information: Reinz 81-37914-00
|
|
|
|
|
| WG1192893 |
Shaft Seal, crankshaft |
Thickness [mm]: 13 mm ;
Width [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 150 mm ;
Outer diameter [mm]: 172 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: ASW ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Elring 457.220
|
|
|
|
|
| WG1163448 |
Shaft Seal, crankshaft |
Width [mm]: 11 mm ;
Inner diameter [mm]: 90 mm ;
Outer diameter [mm]: 110 mm ;
ArticleState: Normal ;
General Information: Ajusa 15065800
|
|
|
|
|
