| Supplier |
Number |
Part name |
Criteria |
Show Article Details |
|
| CORTECO |
20029787B |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Inner diameter 1 [mm]: 80 mm ;
Outer diameter 1 [mm]: 100 mm ;
Height 1 [mm]: 11 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Dust Cover: with dust lip ;
Swirl Type: Right-hand Twist ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| 20029786B |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Inner diameter 1 [mm]: 110 mm ;
Outer diameter 1 [mm]: 130 mm ;
Height 1 [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Swirl Type: Left-hand Twist ;
Dust Cover: with dust lip ;
ArticleState: Normal
|
|
|
|
|
| ELRING |
354.090 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 115 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: AW/BS ;
Swirl Type: Left-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
;
Installation Information: https://youtu.be/oneAsBQV0TE
|
|
|
|
|
| 562.920 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: AW/BS ;
Swirl Type: Left-hand Twist ;
Material: FPM (fluoride rubber) ;
Dust Cover: with dust lip ;
Additionally required articles (article numbers): 834.289 ;
Alternative Repair Kit: 407.960 ;
ArticleState: Normal ;
Installation Information: https://youtu.be/oneAsBQV0TE
|
|
|
|
|
| 369.901 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 100 mm ;
Outer diameter [mm]: 130 mm ;
Width [mm]: 11 mm ;
Radial Shaft Seal Design: ASW ;
Swirl Type: Right-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| 905.480 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 100 mm ;
Outer diameter [mm]: 130 mm ;
Width [mm]: 14 mm ;
Radial Shaft Seal Design: KS ;
Material: FPM (fluoride rubber) ;
ArticleState: Normal
|
|
|
|
|
| 310.050 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 115 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: AW ;
Swirl Type: Left-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| 524.973 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 105 mm ;
Outer diameter [mm]: 130 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: AW/BS ;
Swirl Type: Right-hand Twist ;
Material: FPM (fluoride rubber) ;
Dust Cover: with dust lip ;
Additionally required articles (article numbers): 476.060 ;
Version: Vlies ;
ArticleState: Normal
|
|
|
|
|
| FEBI BILSTEIN |
29824 |
Shaft Seal, crankshaft |
Required quantity: 1 ;
Driven Units: Driven unit: injection pump ;
Driven Units: Driven unit: intermediate disc ;
Thickness [mm]: 12 mm ;
Inner diameter [mm]: 115 mm ;
Outer diameter [mm]: 140 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Material: ACM (Polyacrylate) ;
Supplementary Article/Supplementary Info: with sealing lip ;
Fitting Position: Transmission End ;
Weight [kg]: 0.09 kg ;
ArticleState: Normal ;
General Information: für Schwungrad
;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
| GLASER |
P76390-01 |
Shaft Seal, crankshaft |
Material: FPM (fluoride rubber) ;
Inner diameter [mm]: 105 mm ;
Outer diameter [mm]: 130 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: A FIL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| GOETZE |
50-307027-70 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Height [mm]: 12 mm ;
Rotation Direction: Clockwise rotation ;
Radial Shaft Seal Design: 829S RD W ;
Inner diameter [mm]: 105 mm ;
Material: ACM (Polyacrylate) ;
Material: FPM (fluoride rubber) ;
Outer diameter [mm]: 130 mm ;
ArticleState: Normal
|
|
|
|
|
| 50-306632-50 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Height [mm]: 13 mm ;
Rotation Direction: Anti-clockwise rotation ;
Radial Shaft Seal Design: 829S LD W ;
Inner diameter [mm]: 120 mm ;
Material: FPM (fluoride rubber) ;
Outer diameter [mm]: 140 mm ;
ArticleState: Normal
|
|
|
|
|
| PAYEN |
NB928 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Height [mm]: 12 mm ;
Rotation Direction: Clockwise rotation ;
Radial Shaft Seal Design: 829S RD W ;
Inner diameter [mm]: 105 mm ;
Material: FPM (fluoride rubber) ;
Outer diameter [mm]: 130 mm ;
ArticleState: Normal
|
|
|
|
|
| NB929 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Height [mm]: 13 mm ;
Rotation Direction: Anti-clockwise rotation ;
Radial Shaft Seal Design: 829S LD W ;
Inner diameter [mm]: 120 mm ;
Material: FPM (fluoride rubber) ;
Outer diameter [mm]: 140 mm ;
ArticleState: Normal
|
|
|
|
|
| VICTOR REINZ |
81-23113-00 |
Shaft Seal, crankshaft |
Material: FPM (fluoride rubber) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: AB SL ;
Swirl Type: Left-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| 81-23301-60 |
Shaft Seal, crankshaft |
Material: FPM (fluoride rubber) ;
Inner diameter [mm]: 105 mm ;
Outer diameter [mm]: 130 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: A FIL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| WILMINK GROUP |
WG1150098 |
Shaft Seal, crankshaft |
Width [mm]: 12 mm ;
Material: FPM (fluoride rubber) ;
Inner diameter [mm]: 105 mm ;
Outer diameter [mm]: 130 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: A FIL ;
ArticleState: Normal ;
General Information: Reinz 81-23301-60
|
|
|
|
|
| WG1183374 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Height [mm]: 13 mm ;
Material: FPM (fluoride rubber) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Radial Shaft Seal Design: 829S LD W ;
Rotation Direction: Anti-clockwise rotation ;
ArticleState: Normal ;
General Information: Payen NB929
|
|
|
|
|
| WG1195676 |
Shaft Seal, crankshaft |
Width [mm]: 14 mm ;
Material: FPM (fluoride rubber) ;
Inner diameter [mm]: 100 mm ;
Outer diameter [mm]: 130 mm ;
Radial Shaft Seal Design: KS ;
ArticleState: Normal ;
General Information: Elring 905.480
|
|
|
|
|
| WG1085313 |
Shaft Seal, crankshaft |
Width [mm]: 12 mm ;
Material: FPM (fluoride rubber) ;
Inner diameter [mm]: 105 mm ;
Outer diameter [mm]: 130 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: AW/BS ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 524.973
|
|
|
|
|
| WG1150099 |
Shaft Seal, crankshaft |
Width [mm]: 13 mm ;
Material: FPM (fluoride rubber) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: AB SL ;
ArticleState: Normal ;
General Information: Reinz 81-23113-00
|
|
|
|
|
| WG1192152 |
Shaft Seal, crankshaft |
Width [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 115 mm ;
Outer diameter [mm]: 140 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: AW/BS ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 354.090
|
|
|
|
|
| WG1226558 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Height 1 [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Swirl Type: Left-hand Twist ;
Dust Cover: with dust lip ;
Outer diameter 1 [mm]: 130 mm ;
Inner diameter 1 [mm]: 110 mm ;
ArticleState: Normal ;
General Information: Corteco 20029786B
|
|
|
|
|
| WG1085343 |
Shaft Seal, crankshaft |
Width [mm]: 13 mm ;
Material: FPM (fluoride rubber) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: AW/BS ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 562.920
|
|
|
|
|
| WG1183373 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Height [mm]: 12 mm ;
Material: FPM (fluoride rubber) ;
Inner diameter [mm]: 105 mm ;
Outer diameter [mm]: 130 mm ;
Radial Shaft Seal Design: 829S RD W ;
Rotation Direction: Clockwise rotation ;
ArticleState: Normal ;
General Information: Payen NB928
|
|
|
|
|
| WG1192258 |
Shaft Seal, crankshaft |
Width [mm]: 11 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 100 mm ;
Outer diameter [mm]: 130 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: ASW ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 369.901
|
|
|
|
|
| WG1380071 |
Shaft Seal, crankshaft |
Width [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 115 mm ;
Outer diameter [mm]: 140 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: AW ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 310.050
|
|
|
|
|
